0
edits
Changes
From IGEP - ISEE Wiki
→B
*'''Backup the Flash''': backup the content of the flash memory of your IGEP Processor Board | [[How to backup the Flash | (please contribute with this article)]]
*'''Backup the MicroSD card''': backup the content of the MicroSD card of your IGEP Processor Board (if included) | [[How to backup the MicroSD Card | (please contribute with this article)]]
*'''Boot up sequence''': [[Frequently Asked Questions and Their Answers#Boot up sequence|Boot up sequence]]
*'''Boot loader''': a relatively small program that can be stored in ROM, MicroSD Card, etc. with the minimum of data needed to access the nonvolatile devices of the IGEP Processor Boards | [[:Category:Boot loaders|Boot loaders]] | [http://en.wikipedia.org/wiki/Bootloader#Boot_loader]
*'''Boot partition''': is the first primary partition in the MicroSD card to boot from it, configured with the boot flag mark and formated using FAT file system| [[How to boot from MicroSD Card|Boot from MicroSD Card]]
*'''Boot device priority''': is set up by hardware and cannot be changed by software (except custom designs): 1) USB, 2) UART3, 3) MMC1, 4) OneNAND | [[Frequently Asked Questions and Their Answers#''See Boot up sequence|Boot priority]]''
*'''BSP''': definition | [[Peripherals Summary#BSP|BSP]]
