4,199
edits
Changes
From IGEP - ISEE Wiki
m
→Build kernel from sources
make ARCH=arm modules_install INSTALL_MOD_PATH=[path to your target rootfs]
== igep00x0_wilink8_defconfig ==
'''Configure''' Linux kernel for IGEP OMAP3 new WiLink 8 WIFI:
make ARCH=arm igep00x0_wilink8_defconfig
Then '''build''' the kernel and kernel modules. The result will be an ''zImage'' file in arch/arm/boot directory. Execute:
make ARCH=arm CROSS_COMPILE=[your cross compiler] zImage modules
For example, if you are using gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabi then you should execute following cmdline:
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- zImage modules
You can '''install''' the kernel image to your target boot
cp arch/arm/boot/zImage /media/boot/zImage
You can '''install''' the kernel modules to your target rootfs
make ARCH=arm modules_install INSTALL_MOD_PATH=[path to your target rootfs]
Download and extract Compat Wireless source:
<pre>wget http://downloads.isee.biz/pub/releases/linux_kernel/v2.6.37-11/compat-wireless-wilink8-0.tar.gz
tar -xvf compat-wireless-wilink8-0.tar.gz
cd compat-wireless-wilink8-0
</pre>
= Kernel Parameters =