Changes

This page describes how to use the USB device (or OTG) port of your our [http://www.igep.es/index.php?option=com_content&view=article&id=109&Itemid=123 ISEE IGEP MODULE] with OMAP3 IGEP module processor to communicate with your PCcomputer USB port (or USB hub connected to your computer).

We should directly power the module board via the onboard USB OTG port using and we only need use a USB cable (USB A type plug to mini B type plug cable). The on-board HS USB OTG port is used as the default power input,for IGEP MODULE standalone operating mode.

Once the board is power up and running, we next turn to will get ethernet Ethernet connectivity over the USB OTG cable(USB Ethernet Gadget/RNDIS driver). By default , the module IGEP MODULE interface will have the IP address 192.168.7.2. Other available ways to communicate with IGEP MODULE are WIFI or Bluetooth on-board interfaces. But by default, they are not configured.