646
edits
Changes
From IGEP - ISEE Wiki
no edit summary
== Specifications ==
*23GHz to 24,5GHz Operational<br>*24GHz to 24,250GHz Specified [http://en.wikipedia.org/wiki/ISM_band 24GHz ISM Band])<br>
*+20dBm [http://en.wikipedia.org/wiki/Equivalent_isotropically_radiated_power E.I.R.P.]<br>
*+5V Power Supply*8Watt Consumption (Continuous Operation)
*IF Amplification: 55dB<br>
*IF Automatic Gain Control 40dB Dynamic Range
*IF Standard BandWidth limited 1-32KHz for noise reduction<br>
*Selectable 100Hz to 32KHz IF Filter for Doppler [http://en.wikipedia.org/wiki/Modulation CW] Measurements<br>
*Selectable 4KHz to 25KHz IF Filter for Narrow Band Precise Measurements<br>
*[http://en.wikipedia.org/wiki/Modulation CW] / [http://en.wikipedia.org/wiki/Frequency-shift_keying FSK] / [http://en.wikipedia.org/wiki/FMCW FMCW] Modes<br>
*Direct Digital Synthesizer Modulator Programmable via SPI Link*2 Analog to Digital Converters 1 and 3 MSPS [Optionalon demand, only one operational]
*ADC Data Capture via SPI Link
*Expansion Connector for [http://labs.igep.es/index.php/IGEP_v2_platform IGEPv2]:<br>**Power +5V<br>**GND<br>**DDS MODULATOR Programming through SPI Link<br>**ADC Sampling and Data Capture through SPI Link<br>**IF Signal<br>**CTL1 control port to switch standard or Narrow Band Pass Filtering<br>**CTL2 control port to switch standard or Doppler filtering<br>**CTL control port for initial sweep and capture data<br>**PULSE control signal for pulsed mode operation(on demand)<br>
*Power +5V Connector<br>*EEPROM Programmable via I2C link*Optional Linear Regulator to extend Input Source Power to +16Volts(on demand)
<br>
