0
edits
Changes
Created page with '= Introduction = This article is for '''Yocto Project 1.8.1 - Poky 13.0.y Fido''' branch.<br> It is interesting read How to use the Yocto Project to develop Embedded Linux a…'
= Introduction =
This article is for '''Yocto Project 1.8.1 - Poky 13.0.y Fido''' branch.<br> It is interesting read [[How to use the Yocto Project to develop Embedded Linux]] article previously.<br>
= Build Platform Setup Environment =
{{Message/Information Message|message= '''The instructions below are only for IGEP PROCESSOR BOARDS based on IMX6 processor.'''}}
In order to build an image with BSP support for a given release, you need to download the corresponding BSP repository.
<pre>git clone git://git.yoctoproject.org/poky</pre>
Enter to the poky directory,
<pre>cd poky</pre>
Change tree to commit ee88b51cf2853ab075c9bd2ef7cf4d65d1c96674.
<pre>git checkout ee88b51cf2853ab075c9bd2ef7cf4d65d1c96674 -b fido</pre>
Clone the meta-fsl-arm layer.
<pre>git clone -b fido https://github.com/Freescale/meta-fsl-arm.git</pre>
Clone the meta-openembedded layer.
<pre>git clone git://git.openembedded.org/meta-openembedded</pre>
Enter to the meta-openembedded directory and enter to the meta-oe directory.
<pre>cd meta-openembedded/
cd meta-oe/</pre>
Change tree to commit 10d3c8f85280a0bf867a8e4f84bcda81c290d28e.
<pre>git checkout 10d3c8f85280a0bf867a8e4f84bcda81c290d28e -b fido</pre>
Clone the meta-isee layer.
<pre>git clone git://git.isee.biz/pub/scm/meta-isee.git</pre>
Clone the meta-fsl-arm-extra layer.
<pre>git clone git://git.isee.biz/pub/scm/meta-fsl-arm-extra.git</pre>
<pre>source oe-init-build-env</pre>
Having done that, you can build a igep image by adding the location of the layers to 'bblayers.conf'
Add below line into .../poky/build/conf/bblayers.conf:
<path to>/poky/meta-openembedded/meta-oe \
/poky/meta-fsl-arm \
/poky/meta-fsl-arm-extra \
/poky/meta-isee \
To enable the isee layer, add the 'igep0046 MACHINE' to .../poky/build/conf/local.conf:
MACHINE ?= "imx6q-igep0046"
Add below lines in .../poky/build/conf/local.conf to accept the license
<pre>ACCEPT_FSL_EULA = "1"
LICENSE_FLAGS_WHITELIST = "commercial license"</pre>
You need the below packages for bitbake:
<pre>sudo apt-get install texinfo
sudo apt-get install libsdl1.2-dev </pre>
You should then be able to build a image as such:
<pre>bitbake isee-image-dev</pre>
At the end of a successful build, you should have an image that you could use for boot device from flash or a micro-SD card or you can create the installable firmware using:
<pre> bitbake do-release-firmware </pre>
This article is for '''Yocto Project 1.8.1 - Poky 13.0.y Fido''' branch.<br> It is interesting read [[How to use the Yocto Project to develop Embedded Linux]] article previously.<br>
= Build Platform Setup Environment =
{{Message/Information Message|message= '''The instructions below are only for IGEP PROCESSOR BOARDS based on IMX6 processor.'''}}
In order to build an image with BSP support for a given release, you need to download the corresponding BSP repository.
<pre>git clone git://git.yoctoproject.org/poky</pre>
Enter to the poky directory,
<pre>cd poky</pre>
Change tree to commit ee88b51cf2853ab075c9bd2ef7cf4d65d1c96674.
<pre>git checkout ee88b51cf2853ab075c9bd2ef7cf4d65d1c96674 -b fido</pre>
Clone the meta-fsl-arm layer.
<pre>git clone -b fido https://github.com/Freescale/meta-fsl-arm.git</pre>
Clone the meta-openembedded layer.
<pre>git clone git://git.openembedded.org/meta-openembedded</pre>
Enter to the meta-openembedded directory and enter to the meta-oe directory.
<pre>cd meta-openembedded/
cd meta-oe/</pre>
Change tree to commit 10d3c8f85280a0bf867a8e4f84bcda81c290d28e.
<pre>git checkout 10d3c8f85280a0bf867a8e4f84bcda81c290d28e -b fido</pre>
Clone the meta-isee layer.
<pre>git clone git://git.isee.biz/pub/scm/meta-isee.git</pre>
Clone the meta-fsl-arm-extra layer.
<pre>git clone git://git.isee.biz/pub/scm/meta-fsl-arm-extra.git</pre>
<pre>source oe-init-build-env</pre>
Having done that, you can build a igep image by adding the location of the layers to 'bblayers.conf'
Add below line into .../poky/build/conf/bblayers.conf:
<path to>/poky/meta-openembedded/meta-oe \
/poky/meta-fsl-arm \
/poky/meta-fsl-arm-extra \
/poky/meta-isee \
To enable the isee layer, add the 'igep0046 MACHINE' to .../poky/build/conf/local.conf:
MACHINE ?= "imx6q-igep0046"
Add below lines in .../poky/build/conf/local.conf to accept the license
<pre>ACCEPT_FSL_EULA = "1"
LICENSE_FLAGS_WHITELIST = "commercial license"</pre>
You need the below packages for bitbake:
<pre>sudo apt-get install texinfo
sudo apt-get install libsdl1.2-dev </pre>
You should then be able to build a image as such:
<pre>bitbake isee-image-dev</pre>
At the end of a successful build, you should have an image that you could use for boot device from flash or a micro-SD card or you can create the installable firmware using:
<pre> bitbake do-release-firmware </pre>