What can I do with IGEP SMARC EXPANSION
From IGEP - ISEE Wiki
Revision as of 18:04, 22 March 2017 by egavinc (talk | contribs) (→How to use IGEP SMARC Expansion RS232)
How to use IGEP SMARC Expansion RS232
The IGEP SMARC Expansion RS232 through J800 connector.
Connection test
Connect the SMARC base RS232 RX2 and TX1 to host using a null modem cable.
In the host side open a minicom program with:
minicom -D /dev/ttyUSB0 (if you are using a usb-serial converter).
In the SMARC side write the commands:
stty -F /dev/ttyO3 speed 115200 cs8 -cstopb -parenb (in order to configure the device /dev/ttyO3).
echo 'hello host' > /dev/ttyO3 (sent the message "hello host" to ttyO3).
cat /dev/ttyO3 (recive the messages from host)