What can I do with IGEP COM PROTON

IGEP COM PROTON Tutorial Guides

1/3 - Getting started with IGEP COM PROTON 2/3 - What can I do with IGEP COM PROTON 3/3 - Start developing with IGEP COM PROTON IGEP COM PROTON Product Page IGEP COM PROTON Hardware manual

Overview

This is the 2/3 chapter of IGEP COM PROTON Tutorial Guide.

We will learn some basic tasks.

What can I do

You must logged in the board.

Handle the gpio-LED's

The board has three leds available that can be controlled. In its simplest form, you can control of LEDs from userspace. LEDs appear in /sys/class/leds/ and you can turn on and off with following commands:

echo 1 > /sys/devices/platform/leds-gpio/leds/d242\:green/brightness
echo 1 > /sys/devices/platform/leds-gpio/leds/d441\:green/brightness
echo 1 > /sys/devices/platform/leds-gpio/leds/d442\:green/brightness

A detailed guide on how use GPIO-LEDS can be found by following this link: How to handle the gpio-LED

How to use the SD card

You can connect a micro SD card for storage. After plugin the SD card the kernel should detect the card and automount in /media directory.

---

You have successfully completed this chapter of the guide.

Continue this tutorial guide: 3/3 - Start developing under IGEP Technology

If you have any question, don't ask to ask at the IGEP Community Forum or the IGEP Community Chat