|
|
| (82 intermediate revisions by 3 users not shown) |
| Line 1: |
Line 1: |
| − | (work in progress)
| + | #REDIRECT:[[What can I do with IGEPv2 EXPANSION]] |
| − | | |
| − | = VGA =
| |
| − | | |
| − | omapdss.def_disp=dvi omapfb.mode
| |
| − | | |
| − | = TFT and Touchscreen =
| |
| − | | |
| − | Seiko 7.0 inch WVGA (800 x RGB x 480) TFT:
| |
| − | omapdss.def_disp=lcd-70
| |
| − | | |
| − | Powertip 4.3 inch (480 x RGB x 272) TFT:
| |
| − | omapdss.def_disp=lcd-43
| |
| − | | |
| − | To configure the touchscreen, add "Configured Touchscreen" in "ServerLayout" section and remove "Configured Mouse"
| |
| − | Section "ServerLayout"
| |
| − | Identifier "Default Layout"
| |
| − | Screen "Default Screen"
| |
| − | InputDevice "Generic Keyboard"
| |
| − | # InputDevice "Configured Mouse"
| |
| − | InputDevice "Configured Touchscreen"
| |
| − | Option "AllowEmptyInput" "no"
| |
| − | EndSection
| |
| − | | |
| − | calibrate it yourself until you are happy with the result, for example:
| |
| − | | |
| − | /etc/init.d/xserver-nodm stop
| |
| − | TSLIB_CALIBFILE=/etc/pointercal TSLIB_TSDEVICE=/dev/input/touchscreen0 TSLIB_CONSOLEDEVICE=none ts_calibrate
| |
| − | /etc/init.d/xserver-nodm start
| |
| − | | |
| − | = Modem =
| |
| − | | |
| − | = TVP5151 Video Decoder =
| |
| − | | |
| − | = EEPROM =
| |
| − | | |
| − | = CAN =
| |
| − | | |
| − | Several tools are provided by socketCAN:
| |
| − | | |
| − | * candump: dump traffic on a CAN network
| |
| − | * cansend: simple command line tool to send CAN-frames via CAN_RAW sockets
| |
| − | * cangen: CAN frames generator for testing purpose
| |
| − | * canplayer: send CAN frames from a file to a CAN interface
| |
| − | | |
| − | /sbin/ip link set can0 up type can bitrate 125000
| |
| − | | |
| − | On the receiver side:
| |
| − | | |
| − | candump can0
| |
| − | | |
| − | On the sender side:
| |
| − | | |
| − | cansend can0 123#AABBCCDD
| |
| − | cansend can0 123#R
| |
| − | cansend can0 1F334455#1122334455667788
| |
| − | cansend can0 1F334455#R
| |
| − | | |
| − | On the receiver side, you must see the following messages:
| |
| − | | |
| − | can0 123 [4] AA BB CC DD
| |
| − | can0 123 [0] remote request
| |
| − | can0 1F334455 [8] 11 22 33 44 55 66 77 88
| |
| − | can0 1F334455 [0] remote request
| |
| − | | |
| − | Switch roles and do again
| |
