Difference between revisions of "What can I do with IGEP0022"
From IGEP - ISEE Wiki
Line 1: | Line 1: | ||
(work in progress) | (work in progress) | ||
− | = | + | = VGA = |
− | + | omapdss.def_disp=dvi omapfb.mode | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | = | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
= TFT and Touchscreen = | = TFT and Touchscreen = | ||
Seiko 7.0 inch WVGA (800 x RGB x 480) TFT: | Seiko 7.0 inch WVGA (800 x RGB x 480) TFT: | ||
− | + | omapdss.def_disp=lcd-70 | |
Powertip 4.3 inch (480 x RGB x 272) TFT: | Powertip 4.3 inch (480 x RGB x 272) TFT: | ||
− | + | omapdss.def_disp=lcd-43 | |
− | + | To configure the touchscreen, add "Configured Touchscreen" in "ServerLayout" section and remove "Configured Mouse" | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
Section "ServerLayout" | Section "ServerLayout" | ||
Identifier "Default Layout" | Identifier "Default Layout" | ||
Line 70: | Line 23: | ||
EndSection | EndSection | ||
− | + | calibrate it yourself until you are happy with the result, for example: | |
− | |||
− | |||
− | |||
− | calibrate | ||
− | |||
− | for | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
/etc/init.d/xserver-nodm stop | /etc/init.d/xserver-nodm stop | ||
− | |||
TSLIB_CALIBFILE=/etc/pointercal TSLIB_TSDEVICE=/dev/input/touchscreen0 TSLIB_CONSOLEDEVICE=none ts_calibrate | TSLIB_CALIBFILE=/etc/pointercal TSLIB_TSDEVICE=/dev/input/touchscreen0 TSLIB_CONSOLEDEVICE=none ts_calibrate | ||
− | |||
/etc/init.d/xserver-nodm start | /etc/init.d/xserver-nodm start | ||
− | |||
= Modem = | = Modem = | ||
+ | |||
+ | = TVP5151 Video Decoder = | ||
+ | |||
+ | = EEPROM = | ||
= CAN = | = CAN = |
Revision as of 17:34, 30 June 2011
(work in progress)
VGA
omapdss.def_disp=dvi omapfb.mode
TFT and Touchscreen
Seiko 7.0 inch WVGA (800 x RGB x 480) TFT:
omapdss.def_disp=lcd-70
Powertip 4.3 inch (480 x RGB x 272) TFT:
omapdss.def_disp=lcd-43
To configure the touchscreen, add "Configured Touchscreen" in "ServerLayout" section and remove "Configured Mouse"
Section "ServerLayout" Identifier "Default Layout" Screen "Default Screen" InputDevice "Generic Keyboard" # InputDevice "Configured Mouse" InputDevice "Configured Touchscreen" Option "AllowEmptyInput" "no" EndSection
calibrate it yourself until you are happy with the result, for example:
/etc/init.d/xserver-nodm stop TSLIB_CALIBFILE=/etc/pointercal TSLIB_TSDEVICE=/dev/input/touchscreen0 TSLIB_CONSOLEDEVICE=none ts_calibrate /etc/init.d/xserver-nodm start
Modem
TVP5151 Video Decoder
EEPROM
CAN
Several tools are provided by socketCAN:
- candump: dump traffic on a CAN network
- cansend: simple command line tool to send CAN-frames via CAN_RAW sockets
- cangen: CAN frames generator for testing purpose
- canplayer: send CAN frames from a file to a CAN interface
/sbin/ip link set can0 up type can bitrate 125000
On the receiver side:
candump can0
On the sender side:
cansend can0 123#AABBCCDD cansend can0 123#R cansend can0 1F334455#1122334455667788 cansend can0 1F334455#R
On the receiver side, you must see the following messages:
can0 123 [4] AA BB CC DD can0 123 [0] remote request can0 1F334455 [8] 11 22 33 44 55 66 77 88 can0 1F334455 [0] remote request
Switch roles and do again