Using IGEP CAM OV5640 steps

From IGEP - ISEE Wiki

Revision as of 12:42, 21 November 2016 by Pau (talk | contribs) (Resolutions and frame rates)

Jump to: navigation, search

Overview

This article contains information about HOWTO use IGEP CAM OV5640 (CAMR0030) with IGEP processor boards.

IMPORTANT NOTE: This software is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

This software is provided entirely and is not licensed for any use other than evaluation purposes of the IGEP technology based devices.

Please see the corresponding sections above for details.

IGEP SMARC i.MX6

IGEP SMARC i.MX6 has support for IGEP CAM OV5640, download or compile latest Yocto Project 1.8 - Poky 13.0.y "Fido".

Resolutions and frame rates

The following table shows the available resolutions:

Resolution Capture mode Available frame rates per second Captured frame rates per second
QCIF (176x144) 7 15/30 30
QVGA (320x240) 1 15/30 30
VGA (640x480) 0 15/30 27,41
NTSC (720x480) 2 15/30 30
PAL (720x576) 3 15/30 30
XGA (1024x768) 8 15/30 26,37
720p (1280x720) 4 15/30 28,44
1080p (1920x1080) 5 15 14
QSXGA (2592x1944) 6 15 6,5

IGEP COM MODULE

under construction

IGEPv2

under construction