User:Pau pajuelo

From IGEP - ISEE Wiki

Revision as of 15:48, 29 July 2014 by Pau (talk | contribs) (AUDIO DSP-ARM)

Jump to: navigation, search

TODO:

Categorize new tutorials

How to manage the kernel modules on Linux

How do I edit my kernel command line

AUDIO DSP-ARM

Included (IGEP GST DSP):

AACHEDEC -> DEC AACHE (OK)

http://download.wavetlan.com/SVV/Media/HTTP/FAAC-HE-AAC.aac

gst-launch --gst-debug-level=2 filesrc location=sampleaache.m4a ! TIAuddec1 codecName=aachedec engineName=codecServer ! volume volume=0.25 ! alsasink sync=false

outofthebox->ok


MP3DEC -> DEC MP3 (AUDIO ERRORS)

http://www.stephaniequinn.com/Music/Canon.mp3

gst-launch --gst-debug-level=2 filesrc location=Canon.mp3 ! TIAuddec1 codecName=mp3dec engineName=codecServer ! volume volume=0.25 ! alsasink sync=false

Random fatal bit error


G711DEC -> DEC PCM uLAW (speech) (NOT TESTED)

G711ENC -> ENC PCM uLAW (speech) (NOT TESTED)

Not included (IGEP GST DSP):

ACCLCDEC -> DEC AACLE (NOT TESTED)

AACLDDEC -> DEC AACLD (NOT TESTED)

WMA9 -> DEC WMA9 (COMPILING ISSUES)

ACCLCENC -> ENC AACLE (NOT TESTED)

ACCHEENC -> ENC AACHE (NOT TESTED)

AACLDENC -> ENC AACLD (NOT TESTED)

WMA8 -> ENC WMA8 (NOT TESTED)

Problems adding codecs into igep-gst-dsp

DM3730

DM3730: Decode a MP3 file (OK)

under contruction

does not have an accelerated audio decoder element

- Followed README file from ISEE - IGEP DSP - GST + DMAI Support Package 3.40.00

- Compiled gst-plugins-ugly using yocto tools

- rpm -igst-plugins-ugly-0.*.rpm

- rpm -i libmad0-0.*.rpm

- rpm -i gst-plugins-ugly-mad-0.*.rpm

- gst-launch filesrc location=sample.mp3 ! mad ! volume volume=0.25 ! alsasink

DM3730: Decode a RA or RM audio file (ERRORS)

gst-launch --gst-debug-level=3 filesrc location=sample.ra ! rmdemux ! volume volume=0.25 ! alsasink

http://www.superluminal.com/andalib/ra/listen.ra

gst-plugins-ugly-rmdemux-0.10.19-r1.armv7a.rpm

libgstsdp-0.10-0-0.10.36-r3.armv7a.rpm: libgstsdp-0.10-0 libgstsdp-0.10.so.0

libgstrtsp-0.10-0-0.10.36-r3.armv7a.rpm: libgstrtsp-0.10-0 libgstrtsp-0.10.so.0

Error:

0:00:00.084839071 1550 0xa137b0 WARN rmdemux rmdemux.c:1012:gst_rmdemux_chain:<rmdemux0> Bogus looking header, unprintable FOURCC

0:00:00.085052695 1550 0xa137b0 WARN rmdemux rmdemux.c:1012:gst_rmdemux_chain:<rmdemux0> Bogus looking header, unprintable FOURCC

0:00:00.085540976 1550 0xa137b0 WARN rmdemux rmdemux.c:1057:gst_rmdemux_chain:<rmdemux0> Unknown object_id .ra4

0:00:00.085693564 1550 0xa137b0 WARN rmdemux rmdemux.c:1012:gst_rmdemux_chain:<rmdemux0> Bogus looking header, unprintable FOURCC

0:00:00.085815634 1550 0xa137b0 WARN rmdemux rmdemux.c:1012:gst_rmdemux_chain:<rmdemux0> Bogus looking header, unprintable FOURCC

0:00:00.085907187 1550 0xa137b0 WARN rmdemux rmdemux.c:1057:gst_rmdemux_chain:<rmdemux0> Unknown object_id RaTC

DM3730: Decode an AAC audio file (OK)

EXTRA_OECONF += "--disable-examples --disable-experimental --disable-sdl --disable-cdaudio --disable-directfb \

                --with-plugins=musicbrainz,wavpack,ivorbis,mpegvideoparse,faad2 --disable-vdpau --disable-apexsink \
                --disable-orc"

Install:


faad2-2.7-r2.armv7a.rpm libfaad2-2.7-r2.armv7a.rpm gst-plugins-bad-faad-0.10.23-r2.armv7a.rpm

maybe there are necessary more packages, compare actual gst-bad-recipe and add changes. Necessary add faad2 recipe

gst-launch --gst-debug-level=3 filesrc location=sample.aac ! faad ! volume volume=0.10 ! alsasink

DM3730: Decode an OGG audio file (OK)

Into repositories (base plugins):

http://upload.wikimedia.org/wikipedia/en/0/04/Rayman_2_music_sample.ogg

gst-launch -v filesrc location=sample.ogg ! oggdemux ! vorbisdec ! audioconvert ! volume volume=0.25 ! alsasink

BASE0033 CONNECTOR SUMMARY TABLE

Configure a static IP using the same private network range

under construction

IGEP Firmware Yocto uses the following Ethernet network configuration (IP addresses)

  • eth0 − 192.168.5.1
  • eth0:0 − assigned via dhcp.

This Ethernet network configuration is really useful when you work using a Linux operating system like IGEP SDK Virtual Machine. Because you use eth0 device to communicate easily with your board and eth0:0 device to get Internet acces using dhcp protocol.

But some scenarios this network configuration is not useful, for example: if you use a non-Linux operating system, connect to two IP private range interfaces is not simple. This How-to can be useful to

(Make diagram one: IGEP and Linux defualt communication. Diagram 2 IGEP and other SO alternative configuration)

igep.ini parameters

The kernel command line syntax is name=value1. These next parameters are supported in igep.ini since IGEP-X_Loader 2.4.0-2:

[kernel]

Parameter Name Description Default value Comments
kaddress Kernel copy address =0x80008000 Hex memory address
rdaddress Ram Disk location address =0x81600000 Hex memory address;
disabled by default
serial.low Serial number (low part) =00000001 Numeric
serial.high Serial number (high part) =00000000 Numeric
revision Revision ID =0003 Numeric
kImageName Kernel, binary image name =zImage Kernel or binary image name
kRdImageName Kernel RAM Disk Image Name - Ram Disk image name
MachineID Machine ID (kernel ID)  ;IGEPv2
=2344
 ;Module
=2717
;Proton
=3203
Mode Boot Mode  ;Linux kernel
=kernel
 ;Other image (like uboot)
[binary image]

[kparams]

Parameter Name Description Default value Comments
buddy Enable/disable expansion board support  ;IGEPv2 Expansion Board support
=igep0022
 ;Berlin and Paris Expansion Board support
=base0010
New York Expansion
=ilms0015
console Setup the kernel console parameters =ttyO2,115200n8 -
earlyprintk Enable early printk - -
mem Setup the Board Memory Configuration =430M -
boot_delay Setup the boot delay =0 -
mpurate Setup ARM Processor Speed - -
loglevel Setup the loglevel - -
debug Enable kernel debug output - -
fixrtc Fix RTC variable - -
nocompcache Configure nocompcache variable =1 -
omapfb.mode Configure frame bugger configuration =dvi:hd720-16@50  ;Other configuration
=dvi:1280x720MR-16@60
vram Configure Video RAM assigned to every frame buffer - -
omapfb.vram Configure Video RAM assigned to every frame buffer - -
omapfb.debug Configure frame buffer debug output - -
omapdss.debug Configure DSS Video debug output - -
smsc911x.mac0 Configure Board Ethernet Mac Address =0xb2,0xb0,0x14,0xb5,0xcd,0xde For IGEP BERLIN
smsc911x.mac1 Configure Board Ethernet Mac Address =0xb2,0xb0,0x14,0xb5,0xcd,0xdf For IGEP BERLIN (only with IGEP PROTON)
smsc911x.mac Configure Board Ethernet Mac Address =0xb2,0xb0,0x14,0xb5,0xcd,0xde For IGEPv2, IGEP PROTON, IGEP PARIS and IGEP BERLIN
ubi.mtd Fot UBI FS boot - -
root Configure root directory for MMC, NFS or UBI  ;For mmc memory
=/dev/mmcblk0p2 rw rootwait
 ;For flash memory
=/dev/mtdblock2
nfsroot For NFS boot - -
rootfstype For UBI FS boot - -
ip For NFS boot - -
init Assign init program - -
musb_hdrc.debug USB debug - -
musb_hdrc.use_dma USB over network - -
libertas.libertas_debug Configure libertas debug - -
board.ei485 Enable/disable RS485  ;Enable RS485
=yes
 ;Disable RS485
=no
board.modem Enable/disable GPRS modem  ;Enable modem (IGEPv2 Expansion)
=no
 ;Enable modem (IGEPv2 Expansion)
=yes
buddy.revision Enable hardware buddy revision [A or B] Only for base0010
=A
Only for base0010
=B