4,199
edits
Changes
no edit summary
'''NOTE:''' You cant use igep-remote-x program with IGEP firmware (chapter 3.3 "Remote X")<br>
= How to use SPI (prove with new firmware) =
== Overview ==
This How-To is meant to be a starting point for people to learn use SPI for IGEP devices as quickly and easily as possible. In this how-to, we run an example program that reads and writes registers from 3-axis accelerometer ([http://www.st.com/internet/analog/product/250725.jsp LIS3DH]) included on the board IGEP New York. This program was tested in Poky firmware with Kernel 2.6.37.y.
== Feedback and Contributing ==
At any point, if you see a mistake you can contribute to this How-To.
== Requirements == == How Works ==
== How Works ==
== Attach Spidev to SPI driver ==
=== Modify Linux Kernel Sources ===
=== Enable ilms0015 support<br> ===
=== Test changes<br> ===
== SPI Test program ==
=== Overview ===
=== Compile program ===
== Test program<br> ==
=== Read and Write CTRL_REG1 (20h) ===
=== Read accelerometer axes ===
= How to install IGEP SDK Virtual machine =
= How to install Qt Creator =
= How to install Eclipse =