Difference between revisions of "U-Boot Texas Instruments Series"

From IGEP - ISEE Wiki

Jump to: navigation, search
(Set the board configuration)
 
(10 intermediate revisions by the same user not shown)
Line 56: Line 56:
  
 
* Boot from MicroSD Card.
 
* Boot from MicroSD Card.
* Boot from NAND flash.
+
* Boot from NAND flash or eMMC.
* Boot from eMMC.
 
 
* Boot from USB.
 
* Boot from USB.
 
* Boot from Network.
 
* Boot from Network.
  
==U-Boot 2015.04.y [EOL]==
+
==OMAP5 U-boot 2014.01.y==
===Clone the u-boot repo===
+
On this 2014.01.y version, supported IGEP Processor Boards are:
Clone the u-boot repository using git address:
 
  
<code>$ git clone git@git.isee.biz:arm-boot/u-boot-fslc.git</code>
+
* IGEPv5 (IGEP0050)
  
or
+
===Binaries===
 +
latest stable u-boot version is: '''2014.01-0-omap5 (20140131)'''
  
 <code>$ git clone https://git.isee.biz/arm-boot/u-boot-fslc.git</code>
+
{| border="1"
 +
|-
 +
!|'''Platform'''
 +
!|'''Sources'''
 +
!|'''SPL binary'''
 +
!|'''U-Boot binaries'''
 +
|-
 +
||&nbsp;IGEP0050&nbsp;
 +
||[http://downloads.isee.biz/pub/releases/uboot/v2014.01-0-omap5/u-boot-2014.01-0-omap5.tar.gz 2014.01-0-omap5] ([http://downloads.isee.biz/pub/releases/uboot/v2014.01-0-omap5/u-boot-2014.01-0-omap5.tar.gz.md5 md5sum])
 +
||[http://downloads.isee.biz/pub/releases/uboot/v2014.01-0-omap5/MLO-2014.01-0-omap5.bin MLO-2014.01-0-omap5.bin] ([http://downloads.isee.biz/pub/releases/uboot/v2014.01-0-omap5/SPL-2014.01-0-omap5.bin.md5 md5sum])
 +
||[http://downloads.isee.biz/pub/releases/uboot/v2014.01-0-omap5/u-boot-2014.01-0-omap5.img u-boot-2014.01-0-omap5.img] ([http://downloads.isee.biz/pub/releases/uboot/v2014.01-0-omap5/u-boot-2014.01-0-omap5.img.md5 md5sum)]
 +
|}
  
===Checkout u-boot repo===
+
===Build u-boot from sources===
Go to the u-boot-fscl directory and checkout the version 2015.04.y as:
+
====Download the sources====
 +
'''Download''' the latest stable version sources and follow next steps:
  
<code>$ cd u-boot-fscl</code>
+
wget http://downloads.isee.biz/pub/releases/uboot/v2014.01-0-omap5/u-boot-2014.01-0-omap5.tar.gz
 +
tar xzf u-boot-2014.01-0-omap5.tar.gz
 +
cd [u-boot version]
 +
Or you can clone the u-boot repository using git address:
  
<code>$ git checkout remotes/origin/isee-imx-patches-2015.04-next -b isee-imx-patches-2015.04-next.local</code> 
+
<code>$ git@git.isee.biz:arm-boot/u-boot-arm.git</code>
  
===Set the board configuration===
+
or
Now build the u-boot, first set the configuration with:
 
 
 
IGEP0046 SMARC Quad:
 
  
<code>$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- mx6q_igep0046_defconfig</code>
+
<code>$ https://git.isee.biz/arm-boot/u-boot-arm.git</code>
  
IGEP0046 SMARC Dual lite
+
====Checkout u-boot repo====
 +
Go to the u-boot-arm directory and checkout the isee_v2017.03 as:
  
<code>$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- mx6dl_igep0046_defconfig</code>
+
$ cd u-boot-arm<br />
 +
$ git checkout origin/u-boot-2014.01.y -b u-boot-2014.01.y.local
  
IGEP0046 SMARC Solo
+
====Configure U-Boot for IGEPv5 device.====
 +
make CROSS_COMPILE=arm-linux-gnueabihf- omap5_igep0050_config
  
<code>$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- mx6s_igep0046_defconfig</code>
+
====Build MLO and U-boot====
 +
Then '''build''' the SPL and the u-boot image. The result will be an ''MLO'' file and an ''u-boot.img'' file in current directory. Execute:
  
===Build u-boot===
+
make CROSS_COMPILE=arm-linux-gnueabihf-
You can build u-boot executing this command:
 
  
<code>$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-</code>
+
[[Category:U-Boot]]
 
 
===What next...===
 
After build u-boot you can use it for boot the board, exist several options for boot, check the Hardware Reference Manual about the options available for your board.
 
 
 
* Boot from MicroSD Card.
 
* Boot from NAND flash.
 
* Boot from eMMC.
 
* Boot from USB.
 
* Boot from Network.
 

Latest revision as of 16:19, 8 March 2018

U-boot isee_v2017.03

Clone the u-boot repo

Clone the u-boot repository using git address:

$ git@git.isee.biz:arm-boot/u-boot-arm.git

or

 $ https://git.isee.biz/arm-boot/u-boot-arm.git

Checkout u-boot repo

Go to the u-boot-arm directory and checkout the isee_v2017.03 as:

$ cd u-boot-arm

$ git checkout remotes/origin/isee_v2017.03 -b isee_v2017.03 

Set the board configuration

Now build the u-boot, first set the configuration with:

IGEP COM AQUILA RB11 (256MB RAM)

$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- am335x_igep0033_defconfig

IGEP COM AQUILA RB30 (512MB RAM) (IGEP0033)

$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- am335x_igep0033_RB30_defconfig

IGEP COM PROTON OMAP3530 (IGEP0032)

$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- igep0032_defconfig

IGEP SMARC AM335x (IGEP0034)

$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- am335x_igep0034_defconfig

IGEP SMARC AM335x (IGEP0034) Lite

$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- am335x_igep0034_lite_defconfig

IGEP COM Module DM3730 (IGEP0030)

$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- igep0030_defconfig

IGEP COM Module DM3730 (IGEP0020)

$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- igep0020_defconfig

Build u-boot

You can build u-boot executing this command:

$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-

What next...

After build u-boot you can use it for boot the board, exist several options for boot, check the Hardware Reference Manual about the options available for your board.

  • Boot from MicroSD Card.
  • Boot from NAND flash or eMMC.
  • Boot from USB.
  • Boot from Network.

OMAP5 U-boot 2014.01.y

On this 2014.01.y version, supported IGEP Processor Boards are:

  • IGEPv5 (IGEP0050)

Binaries

latest stable u-boot version is: 2014.01-0-omap5 (20140131)

Platform Sources SPL binary U-Boot binaries
 IGEP0050  2014.01-0-omap5 (md5sum) MLO-2014.01-0-omap5.bin (md5sum) u-boot-2014.01-0-omap5.img (md5sum)

Build u-boot from sources

Download the sources

Download the latest stable version sources and follow next steps:

wget http://downloads.isee.biz/pub/releases/uboot/v2014.01-0-omap5/u-boot-2014.01-0-omap5.tar.gz
tar xzf u-boot-2014.01-0-omap5.tar.gz
cd [u-boot version]

Or you can clone the u-boot repository using git address:

$ git@git.isee.biz:arm-boot/u-boot-arm.git

or

$ https://git.isee.biz/arm-boot/u-boot-arm.git

Checkout u-boot repo

Go to the u-boot-arm directory and checkout the isee_v2017.03 as:

$ cd u-boot-arm
$ git checkout origin/u-boot-2014.01.y -b u-boot-2014.01.y.local

Configure U-Boot for IGEPv5 device.

make CROSS_COMPILE=arm-linux-gnueabihf- omap5_igep0050_config

Build MLO and U-boot

Then build the SPL and the u-boot image. The result will be an MLO file and an u-boot.img file in current directory. Execute:

make CROSS_COMPILE=arm-linux-gnueabihf-