U-Boot Freescale-NXP iMX6 Series

From IGEP - ISEE Wiki

Jump to: navigation, search

isee_imx_v2017.03_4.9.11_1.0.0_ga

Clone the u-boot repo

Clone the u-boot repository using git address:

$ git clone git@git.isee.biz:arm-boot/u-boot-imx.git

or

 $ git clone https://git.isee.biz/arm-boot/u-boot-imx.git

Checkout u-boot repo

Go to the u-boot-imx directory and checkout the version 2015.04.y as:

$ cd u-boot-imx

$ git checkout remotes/origin/isee_imx_v2017.03_4.9.11_1.0.0_ga -b isee_imx_v2017.03_4.9.11_1.0.0_ga 

Set the board configuration

Now build the u-boot, first set the configuration with:

IGEP0046 SMARC Quad:

$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- igep0046_imx6dl_2G_defconfig

IGEP0046 SMARC Dual lite

$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- igep0046_imx6q_2G_defconfig

IGEP0046 SMARC Solo

$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- xxxxx

Build u-boot

You can build u-boot executing this command:

$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-

What next...

After build u-boot you can use it for boot the board, exist several options for boot, check the Hardware Reference Manual about the options available for your board.

  • Boot from MicroSD Card.
  • Boot from NAND flash.
  • Boot from eMMC.
  • Boot from USB.
  • Boot from Network.

U-Boot 2015.04.y [EOL]

Clone the u-boot repo

Clone the u-boot repository using git address:

$ git clone git@git.isee.biz:arm-boot/u-boot-fslc.git

or

 $ git clone https://git.isee.biz/arm-boot/u-boot-fslc.git

Checkout u-boot repo

Go to the u-boot-fscl directory and checkout the version 2015.04.y as:

$ cd u-boot-fscl

$ git checkout remotes/origin/isee-imx-patches-2015.04-next -b isee-imx-patches-2015.04-next.local 

Set the board configuration

Now build the u-boot, first set the configuration with:

IGEP0046 SMARC Quad:

$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- mx6q_igep0046_defconfig

IGEP0046 SMARC Dual lite

$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- mx6dl_igep0046_defconfig

IGEP0046 SMARC Solo

$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- mx6s_igep0046_defconfig

Build u-boot

You can build u-boot executing this command:

$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-

What next...

After build u-boot you can use it for boot the board, exist several options for boot, check the Hardware Reference Manual about the options available for your board.

  • Boot from MicroSD Card.
  • Boot from NAND flash.
  • Boot from eMMC.
  • Boot from USB.
  • Boot from Network.