U-Boot 2015.07.y

From IGEP - ISEE Wiki

Revision as of 10:41, 24 November 2016 by Pau (talk | contribs) (Created page with '__TOC__ '''under construction''' = Introduction = This article is for '''specific 2015.07.y U-Boot branch''' serie.<br> It is interesting read The bootloader U-Boot article …')

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

under construction


This article is for specific 2015.07.y U-Boot branch serie.
It is interesting read The bootloader U-Boot article previously.

On this 2015.07.y version, supported IGEP Processor Boards are:


The currently supported IGEP Expansion Boards are as follows:


Build u-boot from sources

Download the latest stable version from ISEE GIT Repository

git clone -b u-boot-2015.07.y git://git.isee.biz/pub/scm/u-boot-arm.git 
cd u-boot-arm/

Also, it could download from GIT Repositories (http://git.isee.biz/) and test the last unstable version at your own risk (see "U-Boot Mainline Series" chapter in The bootloader U-Boot)

Configure U-Boot for IGEP COM AQUILA device.

make CROSS_COMPILE=[your cross compiler] igep0033_config

Then build the SPL and the u-boot image. The result will be an MLO file and an u-boot.img file in current directory. Execute:

make CROSS_COMPILE=[your cross compiler]

Known issues

  • GCC 4.7 version should be used to compile U-Boot 2013.07.y.