Difference between revisions of "TPS65910"
From IGEP - ISEE Wiki
Manel Caro (talk | contribs) (→Block Diagram) |
Manel Caro (talk | contribs) (→Features) |
||
Line 5: | Line 5: | ||
==Features== | ==Features== | ||
− | = | + | <div class="feat"> |
− | * Two | + | * Embedded Power Controller |
− | * One | + | * Two Efficient Step-Down DC-DC Converters for Processor Cores |
− | * | + | * One Efficient Step-Down DC-DC Converter for I/O Power |
− | + | * One Efficient Step-Up 5-V DC-DC Converter | |
− | * | + | * SmartReflex Compliant Dynamic Voltage Management for Processor Cores |
− | + | * 8 LDO Voltage Regulators and One Real-Time Clock (RTC) LDO (Internal Purpose) | |
− | + | * One High-Speed I<sup>2</sup>C Interface for General-Purpose Control Commands (CTL-I<sup>2</sup>C) | |
− | * | + | * One High-Speed I<sup>2</sup>C Interface for SmartReflex Class 3 Control and Command (SR-I<sup>2</sup>C) |
− | + | * Two Enable Signals Multiplexed with SR-I<sup>2</sup>C, Configurable to Control any Supply State and Processor Cores Supply Voltage | |
− | + | * Thermal Shutdown Protection and Hot-Die Detection | |
− | * | + | * An RTC Resource With: |
− | + | ** Oscillator for 32.768-kHz Crystal or 32-kHz Built-in RC Oscillator | |
− | * | + | ** Date, Time, and Calendar |
− | + | ** Alarm Capability | |
− | * | + | * One Configurable GPIO |
− | * | + | * DC-DC Switching Synchronization Through Internal or External 3-MHz Clock |
− | * | ||
− | * | ||
− | |||
− | * | ||
− | |||
− | |||
− | |||
− | * | ||
− | * | ||
− | * | ||
− | * | ||
− | |||
− | |||
− | * | ||
− | |||
− | |||
− | |||
− | |||
+ | </div> | ||
==Subsystems== | ==Subsystems== |
Revision as of 12:22, 22 March 2018
The TPS65910 device is an integrated power-management IC available in 48-QFN package and dedicated to applications powered by one Li-Ion or Li-Ion polymer battery cell or 3-series Ni-MH cells, or by a 5-V input; it requires multiple power rails. The device provides three step-down converters, one step-up converter, and eight LDOs and is designed to support the specific power requirements of OMAP-based applications.
Block Diagram
Features
- Embedded Power Controller
- Two Efficient Step-Down DC-DC Converters for Processor Cores
- One Efficient Step-Down DC-DC Converter for I/O Power
- One Efficient Step-Up 5-V DC-DC Converter
- SmartReflex Compliant Dynamic Voltage Management for Processor Cores
- 8 LDO Voltage Regulators and One Real-Time Clock (RTC) LDO (Internal Purpose)
- One High-Speed I2C Interface for General-Purpose Control Commands (CTL-I2C)
- One High-Speed I2C Interface for SmartReflex Class 3 Control and Command (SR-I2C)
- Two Enable Signals Multiplexed with SR-I2C, Configurable to Control any Supply State and Processor Cores Supply Voltage
- Thermal Shutdown Protection and Hot-Die Detection
- An RTC Resource With:
- Oscillator for 32.768-kHz Crystal or 32-kHz Built-in RC Oscillator
- Date, Time, and Calendar
- Alarm Capability
- One Configurable GPIO
- DC-DC Switching Synchronization Through Internal or External 3-MHz Clock
Subsystems
- LED driver
- Two pulse width modulation (PWM) generators, PWM0 and PWM1
- Embedded 10-bit ADC with 3 to 8 external inputs
- Real-time clock (RTC) module and retention modules
- HS inter-integrated circuit I2C™ serial control
- Thermal shutdown protection and hot-die detection
- Keypad up to 8 x 8 matrix.
Manuals
- TPS65950 Datasheet Manual.
- TPS65950 OMAP Power Management and System Companion Device Silicon Revision 1.2 Version G