Personal tools

Log in


From IGEP - ISEE Wiki

Jump to: navigation, search

How to use the Yocto Project to develop Embedded Linux

3,484 bytes removed, 09:42, 11 October 2013
Remove duplicated instructions
See the [[Yocto Project 1.4 - Poky 9.0.y dylan]] article
== Create your own Linux image ==
== Yocto 1.2 'denzil' documentation ==
'''Official documentation'''
* [ Yocto Project Quick Start]: This short document lets you get started with the Yocto Project quickly and start building an image.
* [ The Yocto Project Application Development Toolkit (ADT) User's Guide]: This manual provides information that lets you get going with the ADT to develop projects using the Yocto Project.
* [ The Yocto Project Board Support Package (BSP) Developer's Guide]: This brief document defines a structure for BSP components. Having a commonly understood layout encourages standardization.
* [ The Yocto Project Development Manual]: This Manual provides an overview of the development process for images and user-space applications.
* [ The Yocto Project Reference Manual]: This manual is the complete reference guide to the Yocto Project, including the Poky reference system which contains a worki
== Notes ==
=== Ubuntu 13.04 ===
WARNING: Host distribution "Ubuntu 13.04" has not been validated with this version of the build system; you may possibly experience unexpected failures. It is recommended that you use a tested distribution (see [ yocto validated distributions from]).
Although denzil branch is not validated for "Ubuntu 13.04" we have successfully build denzil images with this distribution, see notes below:
Note 1: If you get the following error, or similar:
NOTE: package prelink-native-1.0+git1+7b47f2f8a15ed13b7905bc120bb2586f3e164f7d-r9: task do_fetch: Started
WARNING: Failed to fetch URL git://;protocol=git
ERROR: Fetcher failure: Fetch command export HOME="..."; export SSH_AGENT_PID="2230"; export SSH_AUTH_SOCK="..."; export GIT_CONFIG="..."; git remote add --mirror=fetch origin git:// could not be run:
Remove the local build of git-native
bitbake git-native -c cleanall
and assume as provided adding the following line to conf/local.conf
ASSUME_PROVIDED += "git-native"
Note 2: If you get the following error, or similar:
INSTALL net/netfilter/xt_policy.ko
| MKDIR .../tmp/work/igep00x0-poky-linux-gnueabi/linux-igep-2.6.37-r6/image/lib/firmware/edgeport/
| make[1]: *** No rule to make target `.../image/lib/firmware/./', needed by `.../whiteheat_loader.fw'. Stop.
| make[1]: *** Waiting for unfinished jobs....
| make: *** [_modinst_post] Error 2
| ERROR: oe_runmake failed
NOTE: package linux-igep-2.6.37-r6: task do_install: Failed
Remove the local build of make-native
bitbake make-native -c cleanall
and assume as provided adding the following line to conf/local.conf
ASSUME_PROVIDED += "make-native"
= See also =
== External links ==
*[ Building Ångström]
*[ Openembedded Getting started]
== Others IGEP wiki articles ==
*[[How to get the Ubuntu distribution]]
*[[How to get the Linaro distribution]]
*[[How to get the Android distribution]]