0
edits
Changes
no edit summary
** http://focus.ti.com/docs/toolsw/folders/print/adobeflash-a8.html
=== Known issues === * RECOMMENDED at least a class 6 SD card* RTC doesn't work. Board cannot save time between reboots.* ADB doesn't work. Connecting board to a PC shows nothing in lsusb at all.* Powertip 4.3 inch (480 x RGB x 272) TFT with Touch-Panel (not tested yet) (2011-02-24 Tested, works fine. Display is connected through expansion board. Both display and touch pad function normally.)* Ethernet + Wifi does do not work together, the problem is in the android network "stack". In rowboat froyo an wired ethernet component was copied from (guessing) android-x86 and this is conflicting with the wifi part. This is also mentioned on the android-x86 mailinglist as being an issue.So is not a kernel/ wifi driver issue but entirely a an android stack issue.** If you'll want to use wifi, it seems that it cannot connect to a wifi ap but if you boot the second time it is ok, to use wifi followdo the following:*** step 1: Turn off ethernet: Settings -> > Ethernet configuration -> > Turn off ethernet*** step 2: reboot*** step 3: Turn on wifi: Settings -> > Wireless & amp; networks -> > Wi-Fi settings -> > Turn on Wi-Fi** If you'll want to use ethernet*** step 1: Turn off wifi: Settings -> > Wireless & amp; networks -> > Wi-Fi settings -> > Turn off Wi-Fi*** step 2: reboot*** step 3: Turn on ethernet: Settings -> > Ethernet configuration -> > Turn on ethernet* Bluetooth not supported yet
=== Build Android Froyo from sources ===