Difference between revisions of "RADR0010 Features"
From IGEP - ISEE Wiki
(→Radar v2 Board) |
(→Radar Kit v2) |
||
Line 1: | Line 1: | ||
= Radar Kit v2 = | = Radar Kit v2 = | ||
Radar Kit v2 is a Complete [http://en.wikipedia.org/wiki/K_band K-Band] Radar System Technology Demonstrator. <br> | Radar Kit v2 is a Complete [http://en.wikipedia.org/wiki/K_band K-Band] Radar System Technology Demonstrator. <br> | ||
− | It is the result of combining Radar v2 Board Complete Option with [http://labs.igep.es/index.php/IGEP_v2_platform IGEPv2].<br> | + | It is the result of combining [http://labs.igep.es/index.php/Radar_v2 Radar v2] Board Complete Option with [http://labs.igep.es/index.php/IGEP_v2_platform IGEPv2] Board.<br> |
Designed for using World-Wide [http://en.wikipedia.org/wiki/ISM_band 24GHz ISM Band].<br> | Designed for using World-Wide [http://en.wikipedia.org/wiki/ISM_band 24GHz ISM Band].<br> |
Revision as of 08:52, 3 March 2011
Contents
Radar Kit v2
Radar Kit v2 is a Complete K-Band Radar System Technology Demonstrator.
It is the result of combining Radar v2 Board Complete Option with IGEPv2 Board.
Designed for using World-Wide 24GHz ISM Band.
Radar v2 Board Main Characteristics
- K-Band VCO Radar Transceiver
- CW / FSK / FMCW Modes
- ISEE Propietary Microwave Hardware Design
- 24GHz Low Noise Amplifier
- IF Preamplifier
- Bandwidth Limited for low noise performance
- Integrated micro-strip antennas
- Small Profile
- Temperature Range: -40 to +80º C
- Complete Option makes possible Processor Board connection (for Advanced Applications):
IGEPv2,IGEP MODULE, BEAGLEBOARD and GUMSTIX OVERO COMPATIBLE
Radar v2 Board Features
Basic Option
- 23GHz to 24,5GHz Operational
- 24GHz to 24,250GHz Specified (24GHz ISM Band)
- +20dBm E.I.R.P.
- Voltage Tuning Range: +1 to +6Volts
- +5V Power
- 2,5W Consumption (Continuous Operation)
- IF Pre-Amplification: 25dB
- IF BandWidth limited 1-32KHz for noise reduction
- Selectable 100Hz to 32KHz Filter for Doppler CW Measurements
- CW / FSK / FMCW Modes
- Single Basic Control Connector:
- Power +5V
- GND
- Vt (VCO Tuning Voltage)
- IF Signal
- 5VCTL2 control port to switch standard or Doppler filtering
- 5VPULSE control signal for pulsed mode operation
- Power +5V
- ST - rr (Information Under NDA)
- Released on April 2011.
Complete Option
- 23GHz to 24,5GHz Operational
- 24GHz to 24,250GHz Specified 24GHz ISM Band)
- +20dBm E.I.R.P.
- Voltage Tuning Range: +1 to +6Volts
- +5V Power
- 8Watt Consumption (Continuous Operation)
- IF Amplification: 55dB
- IF Automatic Gain Control 40dB Dynamic Range
- IF Standard BandWidth limited 1-32KHz for noise reduction
- Selectable 100Hz to 32KHz IF Filter for Doppler CW Measurements
- Selectable 4KHz to 25KHz IF Filter for Narrow Band Precise Measurements
- CW / FSK / FMCW Modes
- Direct Digital Synthesizer Modulator Programmable via SPI Link
- 2 Analog to Digital Converters 1 and 3 MSPS [Optional, only one operational]
- ADC Data Capture via SPI Link
- Basic Control Connector:
- Power +5V
- GND
- Vt (VCO Tuning Voltage)
- IF Signal
- CTL1 control port to switch standard or Narrow Band Pass Filtering
- CTL2 control port to switch standard or Doppler filtering
- PULSE control signal for pulsed mode operation
- Power +5V
- Expansion Connector for IGEPv2 or BEAGLEBOARD:
- Power +5V
- GND
- DDS MODULATOR Programming through SPI Link
- ADC Sampling and Data Capture through SPI Link
- IF Signal
- CTL1 control port to switch standard or Narrow Band Pass Filtering
- CTL2 control port to switch standard or Doppler filtering
- CTL control port for initial sweep and capture data
- PULSE control signal for pulsed mode operation
- Power +5V
- Expansion Connectors for IGEP MODULE or GUMSTIX OVERO Board:
- Power +4.2V
- GND
- DDS MODULATOR Programming through SPI Link
- ADC Sampling and Data Capture through SPI Link
- IF Signal
- CTL1 control port to switch standard or Narrow Band Pass Filtering
- CTL2 control port to switch standard or Doppler filtering
- CTL control port for initial sweep and capture data
- PULSE control signal for pulsed mode operation
- Power +4.2V
- USB-OTG Connector. Operational only when IGEP MODULE or GUMSTIX OVERO is used.
- Power +5V Connector
- EEPROM Programmable via I2C link
- Optional Linear Regulator to extend Input Source Power to +16Volts
- Released on April 2011.
USER MANUAL & TECHNICAL SPECIFICATION
USEFUL LINKS
RADAR NOTES
Radio Spectrum
RF Cafe
UWB
HFE Magazine
Microwaves & RF Magazine
History of Radar