Difference between revisions of "Pre-installed software on IGEP Processor Boards"

From IGEP - ISEE Wiki

Jump to: navigation, search
m
m
Line 1: Line 1:
 
= Overview  =
 
= Overview  =
  
<section begin=overview/>If you have a brand new IGEP Processor Board you must know that '''it comes with a firmware''' provided and installed on it by ISEE.  
+
If you have a brand new IGEP Processor Board you must know that '''it comes with a firmware''' provided and installed on it by ISEE.  
  
<br> By default, if you power up your board it will run the software on the flash. But '''you can prepare a MicroSD card and boot from it''' by inserting it to the MicroSD card reader of your IGEP Processor Board, as it has more priority than the flash.  
+
By default, if you power up your board it will run the software on the flash. But '''you can prepare a MicroSD card and boot from it''' by inserting it to the MicroSD card reader of your IGEP Processor Board, as it has more priority than the flash.  
  
<br> The pre-installed software consists of a minimal '''Linux-based distribution''' with a lite X Window System and GNOME Mobile based applications created with Yocto Platform Builder.  
+
The pre-installed software consists of a minimal '''Linux-based distribution''' with a lite X Window System and GNOME Mobile based applications created with Yocto Platform Builder.
 
 
<br><section end=overview/>
 
  
 
= About the pre-installed software  =
 
= About the pre-installed software  =

Revision as of 16:18, 13 August 2012

Overview

If you have a brand new IGEP Processor Board you must know that it comes with a firmware provided and installed on it by ISEE.

By default, if you power up your board it will run the software on the flash. But you can prepare a MicroSD card and boot from it by inserting it to the MicroSD card reader of your IGEP Processor Board, as it has more priority than the flash.

The pre-installed software consists of a minimal Linux-based distribution with a lite X Window System and GNOME Mobile based applications created with Yocto Platform Builder.

About the pre-installed software

The pre-installed software consists of:

  • IGEP X-loader: a bootloader compatible with all IGEP Processor Boards.
  • IGEP Kernel: a Linux Kernel maintained by ISEE.
  • IGEP firmware Yocto: the software distribution consists of a lite X Window System and GNOME Mobile based applications created with Yocto tools

For more information about these specific sotware, read the following articles:

Update the software image

Firmware update

You can update the pre-installed software of your IGEP Processor Board to a current release:


Create a customized MicroSD

You can also create a customized MicroSD with specific software distributions: