Difference between revisions of "Pre-installed software on IGEP Processor Boards"

From IGEP - ISEE Wiki

Jump to: navigation, search
m
 
Line 22: Line 22:
  
 
Other useful articles:  
 
Other useful articles:  
 
+
*[[How_to_create_a_SD-card_with_the_latest_software_image|How to create a SD-card with the latest software image]]
 
*[[Update the PRE-INSTALLED software image to a current release|Update the PRE-INSTALLED software]]  
 
*[[Update the PRE-INSTALLED software image to a current release|Update the PRE-INSTALLED software]]  
 
*[[How to boot from MicroSD Card|How to Create a bootable MicroSD card for IGEP devices]]
 
*[[How to boot from MicroSD Card|How to Create a bootable MicroSD card for IGEP devices]]

Latest revision as of 16:09, 2 March 2016

Overview

If you have a brand new IGEP Processor Board you must know that it comes with a firmware provided and installed on it by ISEE.

By default, if you power up your board it will run the software on the flash. But you can prepare a MicroSD card and boot from it by inserting it to the MicroSD card reader of your IGEP Processor Board, as it has more priority than the flash.

The pre-installed software consists of a minimal Linux-based distribution with a lite X Window System and GNOME Mobile based applications created with Yocto Platform Builder.

About the pre-installed software

The pre-installed software consists of:

  • IGEP X-loader: a bootloader compatible with all IGEP Processor Boards.
  • IGEP Kernel: a Linux Kernel maintained by ISEE.
  • IGEP firmware Yocto: the software distribution consists of a lite X Window System and GNOME Mobile based applications created with Yocto tools

For more information about these specific sotware, read the following articles:

Other useful articles:


Igep forum.png If you have any question, don't ask to ask at the IGEP Community Forum or the IGEP Community Chat Irc.png