=== Important tips<br> ===
Before Use the following tips to configure well, mux you need to review the followings tips<br> without problems:
'''NOTE: *Mux can connect multiple connectors at the same peripheral, this improper use can damage the processor. Make sure to disable old connector configuration before configure mux is necessary review use new one. *Some peripherals can only be used placing or replacing some things:'''resistances. View schematics for more information.<br> <br> *If connector is Some connectors can be shared with other multiple peripherals . If you don't use them you should disable it before us it in them. For example: you need to disable OMAP if you want control wifi module with other pads. *Don't IC via J990 or disable Bluetooth to use the same peripheral in more than one pad. Using it in multiple connectors can damage OmapUART2 via J990.
=== Configure mux<br> ===
*Editing and compile kernel sources. [[How to set up UART2 in J990#Third_way|Example]].
<br>
<br>
[http://www.ti.com/general/docs/lit/getliterature.tsp?literatureNumber=spruf98v&fileType=pdf More information] about mux.
= Feedback and Contributing =