Changes

Mux configuration

1 byte added, 18:05, 27 January 2012

no edit summary

- INPUTENABLE (1 bit) drives an input enable signal to the I/O CTRL.

-> INPUTENABLE = 0: Input Disable. Pin is configured in output only mode. - INPUTENABLE = 1: Input Enable. Pin is configured in bidirectional mode.

- Off > INPUTENABLE = 1: Input Enable. Pin is configured in bidirectional mode values (5 bits) override the pin state when the OFFENABLE bit CONTROL. This feature is used for power saving management:

->OFFENABLE: Off mode values (5 bits) override the pin state override controlwhen the OFFENABLE bit CONTROL. Set to 1 to enable the This feature and to 0 to disable it.is used for power saving management:

->OFFOUTENABLEOFFENABLE: Off mode output enable valuepin state override control. Set to 0 1 to enable the feature and to 1 0 to disable it.

->OFFOUTENABLE: Off mode output enable value. Set to 0 to enable the feature and to 1 to disable it.  ->OFFOUTVALUE: Off mode output value.  ->OFFPULLUDENABLE: Off mode pullup/pulldown enable.

->OFFPULLTYPESELECT: Off mode pullup/pulldown selection.

<br> <br> <br> '''(more information)'''

<br>

• ← Older edit
• Newer edit →

Pau

4,199

edits