Linux Kernel 3.8.y
Contents
Introduction
This article is for specific 3.8.y Linux kernel branch serie.
It is interesting read The Linux kernel article previously.
On this 3.8.y version, supported IGEP Processor Boards are:
- IGEP COM AQUILA (IGEP0033)
- IGEPv5 (IGEP0050)
The currently supported IGEP Expansion Boards are as follows:
- IGEP AQUILA EXPANSION (BASE0033)
Binaries: latest stable kernel version is: 3.8.13-1 (20140107) for AM335x and 3.8.13-0-omap5 (2014)
Platform | Sources | zImage binary | Modules binaries | DTB |
---|---|---|---|---|
IGEP0033 | 3.8.13-1 (md5sum) | zImage-3.8.13-1.bin (md5sum) | modules-3.8.13-1 (md5sum) | am335x-base0033-3.8.13-1.dtb (md5sum) |
IGEP0050 | 3.8.13-0-omap5 (md5sum) | zImage-3.8.13-0-omap5.bin (md5sum) | modules-3.8.13-0-omap5 (md5sum) | omap5-igep0050-3.8.13-0-omap5.dtb (md5sum) |
Build kernel from sources
Download the latest stable version sources and follow next steps:
For IGEP COM AQUILA
wget http://downloads.isee.biz/pub/releases/linux_kernel/v3.8.13-1/linux-3.8.13-1.tar.gz
Or for IGEPv5
wget http://downloads.isee.biz/pub/releases/linux_kernel/v3.8.13-0-omap5/linux-3.8.13-0-omap5.tar.gz
tar xzf linux-[kernel version].tar.gz cd [kernel version]
Also, it could download from GIT Repositories (http://git.isee.biz/) and test the last unstable version at your own risk (see "Linux mainline tree (development)" chapter in The Linux kernel)
Configure Linux kernel for IGEP devices. IGEP is ARM architecture based device. A generic configuration is provided for all IGEP machines, and can be used as the default by
make ARCH=arm omap2plus_defconfig
Then build the kernel, the kernel modules and the device tree files. The result will be an zImage file in arch/arm/boot directory. Execute:
make ARCH=arm CROSS_COMPILE=[your cross compiler] zImage modules dtbs
You can install the kernel modules to your target rootfs
make ARCH=arm CROSS_COMPILE=[your cross compiler] INSTALL_MOD_PATH=[path to your target rootfs] modules_install
Adding New Expansion Boards
This chapter is meant to be a starting point for people to learn how to add your own expansion board in three steps.
TODO
Example: Enable UART2 on IGEP AQUILA EXPANSION (P9.21-P9.22)
diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts index 9729832..de22fd8 100644 --- a/arch/arm/boot/dts/am335x-base0033.dts +++ b/arch/arm/boot/dts/am335x-base0033.dts @@ -126,6 +126,13 @@ 0x168 0x1f /* uart0_ctsn.gpio1_8 */ >; }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + 0x150 0x21 /* spi0_sclk.uart2_rxd | MODE1 */ + 0x154 0x01 /* spi0_d0.uart2_txd | MODE1 */ + >; + }; }; &mcasp0 { @@ -147,3 +154,11 @@ rx-num-evt = <1>; }; +&uart3 { /* really uart2 */ + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; +
Known issues
Not for now
Changelog AM335x
- Release 3.8.13-1
- Enable support for USB Ethernet Gadget
- Add 32KBit EEPROM support
- Release 3.8.13-0
- First release for 3.8.y series
Changelog OMAP5
- Release 3.8.13-0-omap5
- First release for 3.8.y series