Difference between revisions of "IGEP module standalone"
From IGEP - ISEE Wiki
Manel Caro (talk | contribs) (Created page with '= IGEP Module Standalone = center IGEP Module don't require a baseboard for boot. You only must connect the OTG to your PC or use a HUB in this …') |
(No difference)
|
Revision as of 18:19, 9 April 2011
IGEP Module Standalone
IGEP Module don't require a baseboard for boot. You only must connect the OTG to your PC or use a HUB in this way the module be configured as OTG Device.
Power the module without use the OTG and without baseboard.
WARNING: You can damange the module using this information, modify, manipulate or follow this how to can end with the lose of all warranty.
5V Input DC pad in the below image you can find the 5VDC pad. You must connect the positive (+) 5 VDC here.
.jpg)
Also you must find a GND pad, I suggest you use the OTG pads due it's enought big for solder your wire.
.jpg)
