IGEP SMARC iMX6

SMARC module SINGLE/DUAL/QUAD core ARM Cortex-A9 up to 1200 MHz

This Module processor cover an extremely wide performance range. Based on the ARM Cortex-A9 technology, they enable an efficient development of smart devices in an extremely compact, fanless design with balanced processor and graphics performance.

Colors de fons.

1. e6ebf0-- barra lateral
2. dadeed -- Barra principal

Technical information
Processor	iMX6 Solo/DualLite/Dual/Quad, by NXP Semiconductors Up to 4 x ARM Cortex-A9 MPCore NEON SIMD Coprocessor Frequency speed up to 1200 MHz (depending on model)
3D/2D Accelerator	Vivante GC2000 or GC880 (depending on model), GC355 and GC320, providing 2D/3D acceleration with OpenGL-ES2.0 and OpenVG 1.1 support.
Video	Video acceleration: H.264, H.263, MPEG-2 and MPEG-4
Memory	RAM: 512 MB, 1 GB or 2 GB DDR3 eMMC Flash: 4 GB or 8 GB eMMC SPI Flash (optional) EEPROM
Ethernet	10/100/1000 Mbps Ethernet PHY Interface
USB	1 x USB 2.0 Host 1 x USB 2.0 OTG
Display	1 x LVDS (4 lanes) 1 x HDMI 1.4a (with audio) 1 x MIPI DSI (2 lanes)
Image Capture Interface	1 x MIPI CSI2 interfaces (4 lanes Dual/Quad version, 2 lanes Solo/DualLite version)
Wireless	WiFi IEEE 802.11 b/g/n (Access Point: Yes) Bluetooth v4.0 (BLE)
Antenna	1 x Internal WiFi/Bluetooth antenna 1 x U.FL connector for external antenna
Additional Interfaces	3 x UART (4 x No WiFi version) 4 x I2C (3 x Dual/Quad version) 1 x MMC 1 x I2S (2 x No WiFi version) 2 x SPI 2 x PWM 2 x CAN 1 x SDIO 12 x GPIO 1 x JTAG Interface 1 x SATA II (Dual/Quad version) 1 x PCIe v2.0 (1 lane) (Dual/Quad version)
SW Support	Linux
Power Supply	Power from expansion connectors: From 4,7 V to 5,25 V Digital I/O voltage: 1,8 V
Power Consumption	Typical 1,8 W (depending on software) (Quad version) Maximum 6 W (depending on software) (Quad version)
Thermal	Commercial temperature: 0 ºC to +60 ºC Industrial temperature: -40 ºC to +85 ºC
Form Factor	82,00 mm x 50 mm by SMARC Specifications
Humidity	93% relative Humidity at 40 ºC, non-condensing (according to IEC 60068-2-78)
MTBF	> 100000 hours

Evaluation Baseboard
Features	12V~24V Power input with 2.5mm DC Jack connector
	3.5mm Audio Jack
	RTC backup battery holder
	Buzzer
	LVDS, VGA DSUB15 (from 24-bit parallel LCD) and HDMI connector
	1 x 10/100/1000Mbps RJ-45 connector
	2 x RS232/422/485 DSUB9 connector, 2 x RS232 2.0mm Header
	2 x USB host 2.0 type A connector, 1 x mini USB client connector
	1 x PCIe connector, 2 x mini PCIe connector
	2 x CAN BUS header, 1 x 2x7-pin GPIO header, Audio Mic. in and Speaker out Audio Jack
	2 x I2C header (for capacitive touch), 4 x SPI header, 1 Camera/MIPI header
	1 x SDHC connector, 1 x on-carrier-board eMMC flash
	A single 4KB EEPROM is provided on I2C0 that holds the boardinformation. This information includes board name, serial number, and revision information.
	1 x external watchdog reset
	jumpers for LCD 3.3V or 5V voltage, boot selection, RS232 or RS485 selection, SMARC 1.0 or SMARC 1.1 selection
	Form factor: 170mm (L) x 170mm (W) (mini-ITX form factor)

Versions

Model	Description
IGEP0046 - RA
IGEP0046 - RB
IGEP0046 - RC
IGEP0046 - RD

Firmware

Documentation

• i.MX 6 Solo
• i.MX 6 Dual Lite
• i.MX 6 Dual
• i.MX 6 Quad
• IGEP SMARC iMX6 Datasheet
• IGEP SMARC iMX6 Hardware Reference Manual
• SMARC Design Guide
• SMARC Hardware Specification

Software

• [1]

Getting started with IGEP SMARC iMX6

• Getting Started with IGEP SMARC iMX6