Difference between revisions of "IGEP SMARC iMX6"

From IGEP - ISEE Wiki

Jump to: navigation, search
(Documentation)
(Versions)
Line 89: Line 89:
 
! style="width: 492.567px;"|Description
 
! style="width: 492.567px;"|Description
 
|-
 
|-
| style="width: 246px;"|IGEPv2 - RA
+
| style="width: 246px;"|IGEP0046 - RA
| style="width: 492.567px;"|Internal use, OMAP3530 processor (2008)
+
| style="width: 492.567px;"| 
 
|-
 
|-
| style="width: 246px;"|IGEPv2 - RB
+
| style="width: 246px;"|IGEP - RB
| style="width: 492.567px;"|Initial IGEPv2 with OMAP3530 720Mhz (2009) and Marvell WIFI b/g & BT
+
| style="width: 492.567px;"| 
 
|-
 
|-
| style="width: 246px;"|IGEPv2 - RC
+
| style="width: 246px;"|IGEP - RC
| style="width: 492.567px;"|Compatible OMAP3530 and DM3730 (2011)
+
| style="width: 492.567px;"| 
 
|-
 
|-
| style="width: 246px;"|IGEPv2 - RD
+
| style="width: 246px;"|IGEP - RD
| style="width: 492.567px;"|N/A (Internal use)
+
| style="width: 492.567px;"| 
 
|-
 
|-
| style="width: 246px;"|IGEPv2 - RE
+
| style="width: 246px;"|IGEP - RE
| style="width: 492.567px;"|N/A (Internal use)
+
| style="width: 492.567px;"| 
 
|-
 
|-
| style="width: 246px;"|IGEPv2 - RF
+
| style="width: 246px;"|IGEP - RF
| style="width: 492.567px;"|DM3730 with new WILINK 8 module
+
| style="width: 492.567px;"| 
 
|}
 
|}
  

Revision as of 11:30, 4 April 2018

IGEP smarc imx6.jpg

Features

Processor

iMX6 Solo/DualLite/Dual/Quad, by NXP Semiconductors
Up to 4 x ARM Cortex-A9 MPCore
NEON SIMD Coprocessor
Frequency speed up to 1200 MHz (depending on model)

3D/2D Accelerator Vivante GC2000 or GC880 (depending on model), GC355 and GC320,

providing 2D/3D acceleration with OpenGL-ES2.0 and OpenVG 1.1 support.

Video

Video acceleration: H.264, H.263, MPEG-2 and MPEG-4

Memory

RAM: 512 MB, 1 GB or 2 GB DDR3
eMMC Flash: 4 GB or 8 GB eMMC
SPI Flash (optional)
EEPROM

Ethernet

10/100/1000 Mbps Ethernet PHY Interface

USB

1 x USB 2.0 Host
1 x USB 2.0 OTG

Display

1 x LVDS (4 lanes)
1 x HDMI 1.4a (with audio)
1 x MIPI DSI (2 lanes)

Image Capture Interface 1 x MIPI CSI2 interfaces (4 lanes Dual/Quad version, 2 lanes Solo/DualLite version)
Wireless

WiFi IEEE 802.11 b/g/n (Access Point: Yes)
Bluetooth v4.0 (BLE)

Antenna

1 x Internal WiFi/Bluetooth antenna
1 x U.FL connector for external antenna

Additional Interfaces

3 x UART (4 x No WiFi version)
4 x I2C (3 x Dual/Quad version)
1 x MMC
1 x I2S (2 x No WiFi version)
2 x SPI
2 x PWM
2 x CAN
1 x SDIO
12 x GPIO
1 x JTAG Interface
1 x SATA II (Dual/Quad version)
1 x PCIe v2.0 (1 lane) (Dual/Quad version)

SW Support Linux
Power Supply Power from expansion connectors: From 4,7 V to 5,25 V
Digital I/O voltage: 1,8 V
Power Consumption Typical 1,8 W (depending on software) (Quad version)
Maximum 6 W (depending on software) (Quad version)
Thermal Commercial temperature: 0 ºC to +60 ºC
Industrial temperature: -40 ºC to +85 ºC
Form Factor 82,00 mm x 50 mm
Humidity 93% relative Humidity at 40 ºC, non-condensing (according to IEC 60068-2-78)
MTBF > 100000 hours

--Change--

Versions

Model Description
IGEP0046 - RA  
IGEP - RB  
IGEP - RC  
IGEP - RD  
IGEP - RE  
IGEP - RF  

Firmware

Documentation

Software

Getting started with IGEPv2

Ubuntu/Debian Guides

Yocto Guides