Difference between revisions of "IGEP SMARC iMX6"

From IGEP - ISEE Wiki

Jump to: navigation, search
(→‎ )
Line 82: Line 82:
 
||> 100000 hours
 
||> 100000 hours
 
|}
 
|}
−
====[[IMX6|All of processor iMX6]]====
+
===--Change--===
 +
===Versions===
 +
{| class="contenttable sortable" style="width: 890px;"
 +
|-
 +
! style="width: 246px;"|Model
 +
! style="width: 492.567px;"|Description
 +
|-
 +
| style="width: 246px;"|IGEPv2 - RA
 +
| style="width: 492.567px;"|Internal use, OMAP3530 processor (2008)
 +
|-
 +
| style="width: 246px;"|IGEPv2 - RB
 +
| style="width: 492.567px;"|Initial IGEPv2 with OMAP3530 720Mhz (2009) and Marvell WIFI b/g & BT
 +
|-
 +
| style="width: 246px;"|IGEPv2 - RC
 +
| style="width: 492.567px;"|Compatible OMAP3530 and DM3730 (2011)
 +
|-
 +
| style="width: 246px;"|IGEPv2 - RD
 +
| style="width: 492.567px;"|N/A (Internal use)
 +
|-
 +
| style="width: 246px;"|IGEPv2 - RE
 +
| style="width: 492.567px;"|N/A (Internal use)
 +
|-
 +
| style="width: 246px;"|IGEPv2 - RF
 +
| style="width: 492.567px;"|DM3730 with new WILINK 8 module
 +
|}
 +
 
 +
==Firmware==
 +
===Documentation===
 +
* i.MX 6 Solo
 +
* i.MX 6 Dual Lite
 +
* i.MX 6 Dual
 +
* i.MX 6 Quad
 +
 
 +
===Software===
 +
* [http://downloads.isee.biz/pub/isee-releases/ubuntu/xenial_16.04_lts/ubuntu-xenial-armhf-igep-base-v0.01.tgz ]
 +
 
 +
==<span dir="auto">Getting started with IGEPv2</span>==
 +
==Ubuntu/Debian Guides==
 +
==Yocto Guides==

Revision as of 13:08, 3 April 2018

IGEP smarc imx6.jpg

Features

Processor

iMX6 Solo/DualLite/Dual/Quad, by NXP Semiconductors
Up to 4 x ARM Cortex-A9 MPCore
NEON SIMD Coprocessor
Frequency speed up to 1200 MHz (depending on model)

3D/2D Accelerator Vivante GC2000 or GC880 (depending on model), GC355 and GC320,

providing 2D/3D acceleration with OpenGL-ES2.0 and OpenVG 1.1 support.

Video

Video acceleration: H.264, H.263, MPEG-2 and MPEG-4

Memory

RAM: 512 MB, 1 GB or 2 GB DDR3
eMMC Flash: 4 GB or 8 GB eMMC
SPI Flash (optional)
EEPROM

Ethernet

10/100/1000 Mbps Ethernet PHY Interface

USB

1 x USB 2.0 Host
1 x USB 2.0 OTG

Display

1 x LVDS (4 lanes)
1 x HDMI 1.4a (with audio)
1 x MIPI DSI (2 lanes)

Image Capture Interface 1 x MIPI CSI2 interfaces (4 lanes Dual/Quad version, 2 lanes Solo/DualLite version)
Wireless

WiFi IEEE 802.11 b/g/n (Access Point: Yes)
Bluetooth v4.0 (BLE)

Antenna

1 x Internal WiFi/Bluetooth antenna
1 x U.FL connector for external antenna

Additional Interfaces

3 x UART (4 x No WiFi version)
4 x I2C (3 x Dual/Quad version)
1 x MMC
1 x I2S (2 x No WiFi version)
2 x SPI
2 x PWM
2 x CAN
1 x SDIO
12 x GPIO
1 x JTAG Interface
1 x SATA II (Dual/Quad version)
1 x PCIe v2.0 (1 lane) (Dual/Quad version)

SW Support Linux
Power Supply Power from expansion connectors: From 4,7 V to 5,25 V
Digital I/O voltage: 1,8 V
Power Consumption Typical 1,8 W (depending on software) (Quad version)
Maximum 6 W (depending on software) (Quad version)
Thermal Commercial temperature: 0 ºC to +60 ºC
Industrial temperature: -40 ºC to +85 ºC
Form Factor 82,00 mm x 50 mm
Humidity 93% relative Humidity at 40 ºC, non-condensing (according to IEC 60068-2-78)
MTBF > 100000 hours

--Change--

Versions

Model Description
IGEPv2 - RA Internal use, OMAP3530 processor (2008)
IGEPv2 - RB Initial IGEPv2 with OMAP3530 720Mhz (2009) and Marvell WIFI b/g & BT
IGEPv2 - RC Compatible OMAP3530 and DM3730 (2011)
IGEPv2 - RD N/A (Internal use)
IGEPv2 - RE N/A (Internal use)
IGEPv2 - RF DM3730 with new WILINK 8 module

Firmware

Documentation

  • i.MX 6 Solo
  • i.MX 6 Dual Lite
  • i.MX 6 Dual
  • i.MX 6 Quad

Software

Getting started with IGEPv2

Ubuntu/Debian Guides

Yocto Guides

Retrieved from "http://labs.isee.biz/index.php?title=IGEP_SMARC_iMX6&oldid=11293"