Difference between revisions of "IGEP SMARC iMX6"
From IGEP - ISEE Wiki
(→All of processor iMX6) |
|||
Line 9: | Line 9: | ||
| width="76%"| | | width="76%"| | ||
|- | |- | ||
− | || | + | ||'''Processor''' |
− | |||
|| | || | ||
iMX6 Solo/DualLite/Dual/Quad, by NXP Semiconductors<br/> Up to 4 x ARM Cortex-A9 MPCore <br/>NEON SIMD Coprocessor<br/>Frequency speed up to 1200 MHz (depending on model) | iMX6 Solo/DualLite/Dual/Quad, by NXP Semiconductors<br/> Up to 4 x ARM Cortex-A9 MPCore <br/>NEON SIMD Coprocessor<br/>Frequency speed up to 1200 MHz (depending on model) | ||
|- | |- | ||
− | || | + | ||'''3D/2D Accelerator''' |
− | |||
||Vivante GC2000 or GC880 (depending on model), GC355 and GC320, | ||Vivante GC2000 or GC880 (depending on model), GC355 and GC320, | ||
providing 2D/3D acceleration with OpenGL-ES2.0 and OpenVG 1.1 support. | providing 2D/3D acceleration with OpenGL-ES2.0 and OpenVG 1.1 support. | ||
|- | |- | ||
− | || | + | ||'''Video''' |
− | |||
|| | || | ||
Video acceleration: H.264, H.263, MPEG-2 and MPEG-4 | Video acceleration: H.264, H.263, MPEG-2 and MPEG-4 | ||
|- | |- | ||
− | || | + | ||'''Memory''' |
− | |||
|| | || | ||
RAM: 512 MB, 1 GB or 2 GB DDR3<br/>eMMC Flash: 4 GB or 8 GB eMMC<br/>SPI Flash (optional)<br/>EEPROM | RAM: 512 MB, 1 GB or 2 GB DDR3<br/>eMMC Flash: 4 GB or 8 GB eMMC<br/>SPI Flash (optional)<br/>EEPROM | ||
|- | |- | ||
− | || | + | ||'''Ethernet''' |
− | |||
|| | || | ||
10/100/1000 Mbps Ethernet PHY Interface | 10/100/1000 Mbps Ethernet PHY Interface | ||
|- | |- | ||
− | || | + | ||'''USB''' |
− | |||
|| | || | ||
1 x USB 2.0 Host<br/> 1 x USB 2.0 OTG | 1 x USB 2.0 Host<br/> 1 x USB 2.0 OTG | ||
|- | |- | ||
− | || | + | ||'''Display''' |
− | |||
|| | || | ||
1 x LVDS (4 lanes)<br/> 1 x HDMI 1.4a (with audio)<br/> 1 x MIPI DSI (2 lanes) | 1 x LVDS (4 lanes)<br/> 1 x HDMI 1.4a (with audio)<br/> 1 x MIPI DSI (2 lanes) | ||
|- | |- | ||
− | || | + | ||'''Image Capture Interface''' |
− | |||
||1 x MIPI CSI2 interfaces (4 lanes Dual/Quad version, 2 lanes Solo/DualLite version) | ||1 x MIPI CSI2 interfaces (4 lanes Dual/Quad version, 2 lanes Solo/DualLite version) | ||
|- | |- | ||
− | || | + | ||'''Wireless''' |
− | |||
|| | || | ||
WiFi IEEE 802.11 b/g/n (Access Point: Yes)<br/> Bluetooth v4.0 (BLE) | WiFi IEEE 802.11 b/g/n (Access Point: Yes)<br/> Bluetooth v4.0 (BLE) | ||
|- | |- | ||
− | || | + | ||'''Antenna''' |
− | |||
|| | || | ||
1 x Internal WiFi/Bluetooth antenna<br/> 1 x U.FL connector for external antenna | 1 x Internal WiFi/Bluetooth antenna<br/> 1 x U.FL connector for external antenna | ||
|- | |- | ||
− | || | + | ||'''Additional Interfaces''' |
− | |||
|| | || | ||
3 x UART (4 x No WiFi version)<br/> 4 x I2C (3 x Dual/Quad version)<br/> 1 x MMC<br/> 1 x I2S (2 x No WiFi version)<br/> 2 x SPI<br/>2 x PWM<br/> 2 x CAN<br/> 1 x SDIO<br/> 12 x GPIO<br/>1 x JTAG Interface<br/> 1 x SATA II (Dual/Quad version)<br/> 1 x PCIe v2.0 (1 lane) (Dual/Quad version) | 3 x UART (4 x No WiFi version)<br/> 4 x I2C (3 x Dual/Quad version)<br/> 1 x MMC<br/> 1 x I2S (2 x No WiFi version)<br/> 2 x SPI<br/>2 x PWM<br/> 2 x CAN<br/> 1 x SDIO<br/> 12 x GPIO<br/>1 x JTAG Interface<br/> 1 x SATA II (Dual/Quad version)<br/> 1 x PCIe v2.0 (1 lane) (Dual/Quad version) | ||
|- | |- | ||
− | || | + | ||'''SW Support''' |
− | |||
||Linux | ||Linux | ||
|- | |- | ||
− | || | + | ||'''Power Supply''' |
− | |||
||Power from expansion connectors: From 4,7 V to 5,25 V<br/>Digital I/O voltage: 1,8 V | ||Power from expansion connectors: From 4,7 V to 5,25 V<br/>Digital I/O voltage: 1,8 V | ||
|- | |- | ||
− | || | + | ||'''Power Consumption''' |
− | |||
||Typical 1,8 W (depending on software) (Quad version)<br/>Maximum 6 W (depending on software) (Quad version) | ||Typical 1,8 W (depending on software) (Quad version)<br/>Maximum 6 W (depending on software) (Quad version) | ||
|- | |- | ||
− | || | + | ||'''Thermal''' |
− | |||
||Commercial temperature: 0 ºC to +60 ºC<br/>Industrial temperature: -40 ºC to +85 ºC | ||Commercial temperature: 0 ºC to +60 ºC<br/>Industrial temperature: -40 ºC to +85 ºC | ||
|- | |- | ||
− | || | + | ||'''Form Factor''' |
− | |||
||82,00 mm x 50 mm | ||82,00 mm x 50 mm | ||
|- | |- | ||
− | || | + | ||'''Humidity''' |
− | |||
||93% relative Humidity at 40 ºC, non-condensing (according to IEC 60068-2-78) | ||93% relative Humidity at 40 ºC, non-condensing (according to IEC 60068-2-78) | ||
|- | |- | ||
− | || | + | ||'''MTBF''' |
− | |||
||> 100000 hours | ||> 100000 hours | ||
|} | |} | ||
==== ==== | ==== ==== | ||
====[[IMX6|All of processor iMX6]]==== | ====[[IMX6|All of processor iMX6]]==== |
Revision as of 12:46, 3 April 2018
Contents
Features |
|
Processor |
iMX6 Solo/DualLite/Dual/Quad, by NXP Semiconductors |
3D/2D Accelerator | Vivante GC2000 or GC880 (depending on model), GC355 and GC320,
providing 2D/3D acceleration with OpenGL-ES2.0 and OpenVG 1.1 support. |
Video |
Video acceleration: H.264, H.263, MPEG-2 and MPEG-4 |
Memory |
RAM: 512 MB, 1 GB or 2 GB DDR3 |
Ethernet |
10/100/1000 Mbps Ethernet PHY Interface |
USB |
1 x USB 2.0 Host |
Display |
1 x LVDS (4 lanes) |
Image Capture Interface | 1 x MIPI CSI2 interfaces (4 lanes Dual/Quad version, 2 lanes Solo/DualLite version) |
Wireless |
WiFi IEEE 802.11 b/g/n (Access Point: Yes) |
Antenna |
1 x Internal WiFi/Bluetooth antenna |
Additional Interfaces |
3 x UART (4 x No WiFi version) |
SW Support | Linux |
Power Supply | Power from expansion connectors: From 4,7 V to 5,25 V Digital I/O voltage: 1,8 V |
Power Consumption | Typical 1,8 W (depending on software) (Quad version) Maximum 6 W (depending on software) (Quad version) |
Thermal | Commercial temperature: 0 ºC to +60 ºC Industrial temperature: -40 ºC to +85 ºC |
Form Factor | 82,00 mm x 50 mm |
Humidity | 93% relative Humidity at 40 ºC, non-condensing (according to IEC 60068-2-78) |
MTBF | > 100000 hours |