Difference between revisions of "IGEP SMARC iMX6"

From IGEP - ISEE Wiki

Jump to: navigation, search
(Created page with '{{Table/IGEP Technology Devices |Tech_Family={{#lst:Template:Links|IGEPv2_Tech_Family}} |Tech_ID={{#lst:Template:Links|IGEPv2_Tech_ID}} |Name={{#lst:Template:Links|IGEPv2_Name}} …')
(Blanked the page)
Line 1: Line 1:
{{Table/IGEP Technology Devices
= Overview =
This is the 1/3 chapter of the Getting Started with SMARC iMX6 Tutorial Guide. In this first chapter, we will learn :
* Connect some peripherals, including monitor and USB peripherals.
* Boot the board.
Upon completion, you will be ready to continue with chapter 2/3 that explains more advanced tasks.
You need build an image to your SD-card. Please see the article on [[Yocto Project 1.8 - Poky 13.0.y "Fido"  | IGEP YOCTO Firmware]].
= Requirements =
In this tutorial we are going to use the following peripherals:
* SD-card with Yocto Project
* Monitor compatible with HDMI
* HDMI/HDMI cable
* Network cable 
* USB keyboard and a mouse
* PC
= Getting started =
You will learn how to connect some peripherals and power up the board.
== Monitor ==
[[Image:Paris db9.jpg|right|200px]] The board will connect to your HDMI monitor via its HDMI connector.
== Network ==
You may now plug the Ethernet cable into the 10/100 Ethernet jack of the board to get network access.
== Keyboard/Mouse ==
Now, plug your keyboard and mouse into any of the available USB.
== SD-card ==
Finally, plug the SD-card into the SD-card socket.
== Booting ==
With all the peripherals attached, plug in the wall adapter (5V DC) and power on your board. You will see a few lights flash.
{{Navigation/IGEP Technology Guides/Getting Started/Ending
[[Category:IGEP Technology Devices Guides]]

Revision as of 11:47, 6 May 2016