Difference between revisions of "IGEP SMARC EXPANSION"

From IGEP - ISEE Wiki

Jump to: navigation, search
Line 1: Line 1:
#REDIRECT [[Getting_started_with_IGEP_SMARC_EXPANSION]]
+
===Expansion board for [https://www.isee.biz/products/igep-smarc SMARC] modules===
 +
 
 +
 
 +
The IGEP SMARC EXPANSION is a fully equipped baseboard used to evaluate and test IGEP SMARC modules. It has been designed to be used as the fastest way to develop and check the user's final application before building a prototype, saving costs and reducing time-to-market.
 +
 
 +
{| class="uk-table uk-table-striped uk-table-condensed uk-table-hover" style="width: 100%;" border="0"
 +
|-
 +
| width="24%"|
 +
===Features===
 +
| width="76%"| 
 +
|-
 +
||
 +
====Compatible====
 +
||
 +
[https://www.isee.biz/products/igep-smarc/igep-smarc-pxa2128 IGEP SMARC PXA2128]<br />[https://www.isee.biz/products/igep-smarc/igep-smarc-imx6 IGEP SMARC iMX6]<br />[https://www.isee.biz/products/igep-smarc/igep-smarc-am335x IGEP SMARC AM335x]
 +
 
 +
|-
 +
||
 +
====Peripherals====
 +
||1 x Button LED<br />3 x Boot jumpers<br />1 x PWM<br />1 x SPI<br />1 x I2C<br />1 x MMC<br />1 x CAN transceiver<br />1 x RS485<br />2 x RS232<br />1 x Audio codec
 +
|-
 +
||
 +
====Connectors====
 +
||
 +
1 x SMARC connector<br />5 V Power Supply<br />1 x 10/100/1000 Mbps Ethernet PHY Interface<br />1 x HDMI 1.4a output type A receptacle<br />3 x USB 2.0 type A receptacle<br />1 x USB 3.0 type micro AB receptacle<br />1 x Serial RS232 3V3 expansion header<br />1 x Serial TTL 3V3 debug header<br />1 x Stereo Line Audio mic In mini jack<br />1 x Stereo Line Audio Out mini jack<br />1 x LVDS connector (with power supply, touch interface and EDID information)<br />1 x CSI connector (Raspberry Pi camera compatible)<br />1 x Terminal 5 pins plug<br />1 x I/O Expansion 28 pins header<br />1 x Modem USB interface<br />1 x mSATA interface<br />1 x Micro SD connector
 +
 
 +
|-
 +
||
 +
====Power====
 +
||Power from expansion connectors: 5V<br />Power from jack power: 5V
 +
|-
 +
||
 +
====SW Support====
 +
||
 +
Linux
 +
 
 +
|-
 +
||
 +
====Thermal====
 +
||
 +
Commercial temperature: 0 ºC to +60 ºC<br />Industrial temperature: -40 ºC to +85 ºC
 +
 
 +
|-
 +
||
 +
====Form Factor====
 +
||
 +
 142 mm x 90 mm
 +
 
 +
|}
 +
 
 +
 
 +
==<span id="Getting_started_with_IGEP_BERLIN" class="mw-headline"><span dir="auto">Getting started with IGEP SMARC EXPANSION<br /></span></span>==
 +
* [[Getting_started_with_IGEP_SMARC_EXPANSION]]

Revision as of 12:47, 11 April 2018

Expansion board for SMARC modules

The IGEP SMARC EXPANSION is a fully equipped baseboard used to evaluate and test IGEP SMARC modules. It has been designed to be used as the fastest way to develop and check the user's final application before building a prototype, saving costs and reducing time-to-market.

Features

 

Compatible

IGEP SMARC PXA2128
IGEP SMARC iMX6
IGEP SMARC AM335x

Peripherals

1 x Button LED
3 x Boot jumpers
1 x PWM
1 x SPI
1 x I2C
1 x MMC
1 x CAN transceiver
1 x RS485
2 x RS232
1 x Audio codec

Connectors

1 x SMARC connector
5 V Power Supply
1 x 10/100/1000 Mbps Ethernet PHY Interface
1 x HDMI 1.4a output type A receptacle
3 x USB 2.0 type A receptacle
1 x USB 3.0 type micro AB receptacle
1 x Serial RS232 3V3 expansion header
1 x Serial TTL 3V3 debug header
1 x Stereo Line Audio mic In mini jack
1 x Stereo Line Audio Out mini jack
1 x LVDS connector (with power supply, touch interface and EDID information)
1 x CSI connector (Raspberry Pi camera compatible)
1 x Terminal 5 pins plug
1 x I/O Expansion 28 pins header
1 x Modem USB interface
1 x mSATA interface
1 x Micro SD connector

Power

Power from expansion connectors: 5V
Power from jack power: 5V

SW Support

Linux

Thermal

Commercial temperature: 0 ºC to +60 ºC
Industrial temperature: -40 ºC to +85 ºC

Form Factor

 142 mm x 90 mm


Getting started with IGEP SMARC EXPANSION