4,199
edits
Changes
m
== Serial port ==
'''Basic''' [[Image:Igepv2expdb9connector.PNG|right|200px]]
IGEPv2 Expansion integrates a DB9 RS232 connector. Plug a DB9 cable. <br> '''Know more''' This peripheral (UART 3) can be used to debug system using kernel traces, getting a remote prompt, etc. <br> <br> <br> == VGA monitor == '''Basic''' {| cellspacing="1" cellpadding="1" width="363" border="1" align="right"|-| [[Image:Igepv2expconnecttovga.jpg|150px]] | [[Image:Igepv2expvgaconnector.PNG|200px]]|} IGEPv2 Expansion integrates a VGA connector, the output VGA signal is equal to HDMI connector. Plug a monitor with VGA input. '''Know more''' This output is controled by ADV7125KSTZ140 Integrated Circuit. <br> <br> <br><br> <br> == CAN bus == '''Basic''' [[Image:Igepv2expcanconnector.PNG|right|200px]]IGEPv2 Expansion integrates a CAN peripheral. Connect any CAN bus device or network to the CAN bus connector (J703).<br> '''Know more''' This output is controled by MICROCHIP MCP2515. J703 is a 3.5 mm pitch terminal blocks 4 Positions: {| cellspacing="1" cellpadding="1" width="350" border="1"|-| Signal Name | Pin #<br> | Description|-| VDD_CAN | J703:1 | Supply Voltage (+5V DC)|-| CANL | J703:2 | CAN Low-Level Voltage I/O|-| GND | J703:3 | Ground|-| CANH | J703:4 | CAN High-Level Voltage I/O|} == GSM/GPRS modem == '''Basic''' {| align="right" cellspacing="1" cellpadding="1" border="1" width="200"|-| [[Image:IGEP0022 Modem with antenna.png|200px]] | [[Image:Igepv2expcardreader.PNG|right|200px]]|-| GSM-GPRS antenna (highly recommended) | SIM card reader|} IGEPv2 Expansion integrates a GSM/GPRS modem to make phone calls or to send SMS or to write and read data from it, etc.<br> '''Know more''' Modem chip Telit GE865 is a small GSM/GPRS Ball-Grid-Array BGA module with next main features: *Quad-band EGSM 850 / 900 / 1800 / 1900 MHz *Power consumption (typical values) - Power off: ‹ 62 uA<br> - Idle (registered, power saving): 1.6 mA @ DRX=9 <br> <br> <br> == Composite Video Decoder == '''Basic''' [[Image:Igepv2expvideocompositeconnector.PNG|right|200px]]IGEPv2 Expansion integrates two composite video connectors to decode analog input signal. Plug some peripheral with video composite output.<br> '''Know more''' Analog input is decoded by TVP5151. <br> {{Navigation/IGEP Technology Guides/Getting Started/Ending
}}
{{Table/IGEP Technology Devices
|Tech_Family={{#lst:Template:Links|IGEPv2_EXPANSION_Tech_Family}}
|Tech_ID={{#lst:Template:Links|IGEPv2_EXPANSION_Tech_ID}}
|Name={{#lst:Template:Links|IGEPv2_EXPANSION_Name}}
|Image={{#lst:Template:Links|IGEPv2_EXPANSION_Image}}
|ISEE_MainPage={{#lst:Template:Links|IGEPv2_EXPANSION_ISEE_MainPage}}
|ISEE_Hardware={{#lst:Template:Links|IGEPv2_EXPANSION_ISEE_Hardware}}
→Getting started
|}
|Next_Step={{#lst:Template:Links|IGEPv2_EXPANSION_Community_Guides_2}}
}}