0
edits
Changes
m
IGEP0022 IGEPv2 EXPANSION integrates a LCD backlight driver (Texas instruments TPS61081) and touch screen controller (Texas instruments TSC2046), 4-wire touch screen controller which supports a low-voltage I/O interface which can be directly connected to a SEIKO 7” LCD or to a POWERTIP 4.3” LCD. Use J301 connector for POWERTRIP 4.3" or use J302, J303 and J304 connector for SEIKO 7".<br>
[[Category:IGEP0022]]
no edit summary
= Mounting IGEPv2 EXPANSION =
The IGEP0022 expansion board IGEPv2 EXPANSION connects to IGEP0020 IGEPv2 via 5 connectors of 10, 22, 28 and 30 pins located on both boards. First align the biggest 28 pin-connector gently press it until the other connectors insert into their corresponding connectors from the other board.<br>
[[Image:Igep0022 before mount.jpg|left|307x250px]][[Image:Igep0022 igep0020 combo.jpg|right|404x270px]]
== Jumpers configuration<br> ==
Some IGEP0022 boards IGEPv2 EXPANSION may include three jumpers that correspond to:<br>
<br>
<br>
These jumpers are designed for test and lab purposes to force a specific device by hardware.<br>For a '''normal use''' of IGEP0022 IGEPv2 EXPANSION '''THESE JUMPERS SHOULD BE REMOVED''' from the expansion board.
== Serial port ==
== VGA monitor ==
Connect a VGA monitor to the IGEP0022 IGEPv2 EXPANSION VGA connector.<br>
== CAN bus ==
Connect any CAN bus device or network to the CAN bus connector of the IGEP0022IGEPv2 EXPANSION.<br>
== SIM card reader ==
A SIM card reader is provided with IGEP0022IGEPv2 EXPANSION. You may connect a SIM card to use the GSM/GPRS modem to make phone calls or to send SMS or to write and read data from it, etc.
== GSM/GPRS antenna ==
== TFT and Touchscreen ==
[[Image:IGEP0022 PROTO RA DSC 0142.JPG|frame|center|571x417px]]<br>
== Composite video ==
There are two composite video inputs via RCA connectors in the IGEP0022IGEPv2 EXPANSION.<br>
[[Category:IGEP Technology Devices Guides]]
[[Category:Work in progress]]