Changes

Getting started with IGEPv2

1 byte removed, 17:26, 28 August 2012

m

→‎Log into IGEPv2 via Ethernet interface

First of all, adjust the IP of your PC in order to be in the right subnet of IGEPv2, for example: 192.168.5.10

'' Linux: ''

'' Linux'NOTE: ''' You don't need to configure anything if you use [http://labs.isee.biz/index.php/IGEP_SDK_Virtual_Machine IGEP SDK Virtual Machine]

If you are running Linux in your PC, open a Terminal session and set the IP of the Ethernet interface in which IGEPv2 is connected (for example eth0):

sudo ifconfig eth0 down

sudo ifconfig eth0 192.168.5.10 up

 

'''NOTE:''' You don't need to configure anything if you use [http://labs.isee.biz/index.php/IGEP_SDK_Virtual_Machine IGEP SDK Virtual Machine]

 

'' Windows: ''

# Set a static IP (192.168.5.10) and 255.255.255.0 as network submask

# Close all the dialogs

 

'''Connect'''

• ← Older edit
• Newer edit →

Pau

4,199

edits