0
edits
Changes
m
Added Ethernet network comments
*usb0 - 192.168.7.1
By default, the IP of the Ethernet interface is 192.168.5.1 Once you are logged in, you can see which interfaces are up in IGEPv2. In the SSH console, run: ifconfig It will list all the active network interfaces. If you want to change, for example, ''eth0'' you can use the following commands (if you do it now, it will close the SSH session, as it will change the Ethernet IP): ifconfig eth0 < new IP > In order to make permanent changes (save the configuration upon next chapter of this tutorial guidestart), we you will learn how have to connect through all edit the other /etc/network/interfacesfile in your IGEPv2.