Changes

Getting started with IGEP SMARC iMX6

153 bytes added, 10:01, 11 May 2016

no edit summary

== Monitor ==

[[Image:~~igep0046~~igep0046_boot.~~jpg~~png|right|200px]] The board will connect to your HDMI monitor via its of red square HDMI connector.

Finally, plug the SD-card into the SD-card socket.

== Configure sysboot ==

[[Image:igep0046.jpg|right|200px]] Boot with SD-card selection, put a jumper in boot0 on your IGEP SMARC EXPANSION.

== Booting ==

0

edits