Getting started with IGEP SMARC EXPANSION

IGEP SMARC EXPANSION Tutorial Guides

1/3 - Getting started with IGEP SMARC EXPANSION 2/3 - What can I do with IGEP SMARC EXPANSION 3/3 - Start developing with IGEP SMARC EXPANSION IGEP SMARC EXPANSION Product Page IGEP SMARC EXPANSION Hardware manual

Overview

This is the 1/3 chapter of the Getting Started with IGEP AQUILA EXPANSION Tutorial Guide. In this first chapter, we will learn :

• Connect some peripherals, including monitor and USBs.
• Boot the board and touring the default firmware.
• Connect remotely to the board via Serial interface.

Upon completion, you will be ready to continue with chapter 2/3 that explains more advanced tasks.

Requirements

In this tutorial we are going to use the following peripherals:

• IGEP SMARC AM335x o iMX moudule with an uSD card
• IGEP SMARC EXPANSION with its power supply
• FTDI cable
• Monitor compatible with HDMI with audio.
• HDMI cable
• Powered USB HUB 2.0
• USB keyboard and a mouse
• Network cable
• PC