Difference between revisions of "Getting started with IGEP NEW YORK"

From IGEP - ISEE Wiki

Jump to: navigation, search
 
(5 intermediate revisions by one other user not shown)
Line 9: Line 9:
  
  
= Overview =
+
 
This is the 1/3 chapter of IGEP NEW YORK Expansion Tutorial Guide.  
+
=Overview=
 +
This is the 1/3 chapter of IGEP NEW YORK Expansion Tutorial Guide.
  
 
In this first chapter, we will learn how to connect some expansion peripherals.
 
In this first chapter, we will learn how to connect some expansion peripherals.
Line 18: Line 19:
  
  
= Requirements =
 
  
 +
=Requirements=
 
In this tutorial we are going to use the following peripherals:
 
In this tutorial we are going to use the following peripherals:
  
Line 28: Line 29:
 
* PC
 
* PC
  
= Getting started =
+
=Getting started=
 
 
 
<div style="text-align: center;">
 
<div style="text-align: center;">
 
{{#ev:youtube|QJjbcWNyPN4|500}}
 
{{#ev:youtube|QJjbcWNyPN4|500}}
 
</div>
 
</div>
 +
==Connect IGEP NEW YORK Expansion with IGEP COM MODULE/NEUTRON Board==
 +
[[Image:NY+module.JPG|right|200px]]The IGEP NEW YORK Expansion connects to the IGEP COM MODULE/NEUTRON Board through J1 and J4 connectors. Just take a look on the figure below to mount it:<br /> <br /><br /><br /><br /><br /><br />
  
== Connect IGEP NEW YORK Expansion with IGEP COM MODULE/NEUTRON Board ==
+
==Connect IGEP NEW YORK Expansion with IGEP COM PROTON Board==
[[Image:NY+module.JPG|right|200px]]
+
[[Image:NY+proton.JPG|right|200px]]The IGEP NEW YORK Expansion connects to the IGEP COM PROTON Board through J1 and J4 connectors. Just take a look on the figure below to mount it:<br /> <br /><br /><br /><br /><br /><br />
The IGEP NEW YORK Expansion connects to the IGEP COM MODULE/NEUTRON Board through J1 and J4 connectors. Just take a look on the figure below to mount it:<br> <br><br><br><br><br><br>
 
  
== Connect IGEP NEW YORK Expansion with IGEP COM PROTON Board ==
+
==Enable IGEP NEW YORK Expansion support==
[[Image:NY+proton.JPG|right|200px]]
+
IGEP Yocto Firmware doesn't come with IGEP BERLIN Expansion support. Edit igep.ini file to configure it, you can do this [[How_do_I_edit_my_kernel_command_line | adding following kernel cmdline parameter]]
The IGEP NEW YORK Expansion connects to the IGEP COM PROTON Board through J1 and J4 connectors. Just take a look on the figure below to mount it:<br> <br><br><br><br><br><br>
 
  
== Enable IGEP NEW YORK Expansion support ==
 
 
IGEP Yocto Firmware doesn't come with IGEP BERLIN Expansion support. Edit igep.ini file to configure it, you can do this [[How_do_I_edit_my_kernel_command_line | adding following kernel cmdline parameter]]
 
 
<pre>;buddy = base0010 buddy.revision=B
 
<pre>;buddy = base0010 buddy.revision=B
 
buddy=ilms0015</pre>
 
buddy=ilms0015</pre>
  
== How to identify New York revisions ==
+
==Remote connection via USB Ethernet Gadget==
 
 
IGEP New York has two different revisions: ILMS0015-RA1 and ILMS0015-RA2. It is important to know which revision you possess, because RA2 can be powered at 5Vdc, while RA1 doesn't (as it was designed to be powered by connecting it to an ILMS0010), so it can be harmful for the board.
 
You can identify RA1 because it has two connectors on each side of the board, while RA2 has only two connectors on one side (it has the pads on the other side, but they aren't populated).
 
 
 
== How to upgrade ILMS0015-RA1 to ILMS0015-RA2 ==
 
{{Message/Warning Message|title=Disclaimer|message=Modifying your board automatically removes any kind of guaranty. Do it at your own risk.}}
 
 
 
To upgrade your IGEP New York to revision RA2, in order to power your board through the accessible pins, you must solder a 4.7Vdc zener diode between TP1 and ground (nearest ground is the one from MOSFET Q1's drain) to act as a linear voltage regulator. The way to do it is by soldering the zener's cathode (marked with a strip) to TP1 and the diode's anode to ground (Q1's drain pad).
 
 
 
== Remote connection via USB Ethernet Gadget ==
 
 
 
 
{{Message/Information Message|title=|message=If you aren't using a Linux operating system, use [http://labs.isee.biz/index.php/IGEP_SDK_Virtual_Machine IGEP SDK Virtual Machine] to connect to the board}}
 
{{Message/Information Message|title=|message=If you aren't using a Linux operating system, use [http://labs.isee.biz/index.php/IGEP_SDK_Virtual_Machine IGEP SDK Virtual Machine] to connect to the board}}
  

Latest revision as of 10:50, 10 April 2018


Overview

This is the 1/3 chapter of IGEP NEW YORK Expansion Tutorial Guide.

In this first chapter, we will learn how to connect some expansion peripherals.



Requirements

In this tutorial we are going to use the following peripherals:

  • IGEP COM MODULE or IGEP COM PROTON
  • IGEP NEW YORK Expansion
  • USB Standard-A to Mini-B type cable
  • Powered USB HUB 2.0
  • PC

Getting started

Connect IGEP NEW YORK Expansion with IGEP COM MODULE/NEUTRON Board

NY+module.JPG
The IGEP NEW YORK Expansion connects to the IGEP COM MODULE/NEUTRON Board through J1 and J4 connectors. Just take a look on the figure below to mount it:






Connect IGEP NEW YORK Expansion with IGEP COM PROTON Board

NY+proton.JPG
The IGEP NEW YORK Expansion connects to the IGEP COM PROTON Board through J1 and J4 connectors. Just take a look on the figure below to mount it:






Enable IGEP NEW YORK Expansion support

IGEP Yocto Firmware doesn't come with IGEP BERLIN Expansion support. Edit igep.ini file to configure it, you can do this adding following kernel cmdline parameter

;buddy = base0010 buddy.revision=B
buddy=ilms0015

Remote connection via USB Ethernet Gadget

Information.jpg If you aren't using a Linux operating system, use IGEP SDK Virtual Machine to connect to the board

In your Host Machine, open a terminal session and connect to the board using the SSH protocol,

$ ssh root@192.168.7.1

an empty password for root user should work to access to the shell prompt.


If you're experiencing some problems connecting to the board try with following guide : Using USB ethernet gadget to communicate



You have successfully completed this chapter of the guide.


Continue this tutorial guide: [[What can I do with IGEP NEW YORK|2/3 - What can I do with IGEP NEW YORK]]
Igep forum.png If you have any question, don't ask to ask at the IGEP Community Forum or the IGEP Community Chat Irc.png