0
edits
Changes
m
no edit summary
This page describes how to use the USB device port of our [http://www.igep.es/index.php?option=com_content&view=article&id=109&Itemid=123 ISEE IGEP MODULE] with OMAP3 processor to communicate with the USB port of your computer (or USB hub connected to your computer).
[[Image:IGEP_module_01IGEP module 01.jpg|center|589x201px]]
We can power up the IGEP MODULE via the on-board USB OTG port, and we only need to use a USB cable (USB A type plug to mini B type plug).
The on-board HS USB OTG port is used as the default power input for IGEP MODULE standalone operating mode.
Once the board is powered up and running, we will get Ethernet connectivity over the same USB cable (USB Ethernet Gadget/RNDIS driver) or via wireless .
By default, the IGEP MODULE usb interface will have the IP address 192.168.7.2, and the wireless interface comes with WLAN_IGEP as ESSID and 192.168.6.1 as IP address.
== Connect using USB Ethernet Gadget/RNDIS driver ==