4,199
edits
Changes
m
→Requirements
= Requirements =
In these tutorials this tutorial we are going to need use the following componentsperipherals:
*[http://isee.biz/products/processor-boards/igep-com-proton IGEP COM PROTON] MODULE or [http://isee.biz/products/processor-boards/igep-com-module IGEP COM MODULE].PROTON* IGEP BERLIN Expansion*5V DC power supply with a minimum of 3A current capacity.*[http://shop.isee.biz/buy-online/accesories/tft-24-bits-seiko-7.html TFT touch screen Seiko 7"] screen if you need a touch screen. *Ethernet cable for network communications.*A monitor Monitor compatible with DVI-D.or VGA*An USB keyboard and a mouse (optional).HDMI/DVI-D cable or VGA cable*4 pin connector for CAN Bus with another IGEP Board with CAN peripheral to follow CAN Bus communication tutorial.*SIM card with an antenna to follow Telit modem tutorial.Network cable*Composite video cable, composite video output peripheral (PAL or NTSC) * SIM card with an antenna* USB keyboard and a screen to follow TVP5151 tutorial.mouse (optional)*Li-on battery with 3V3 (optional).*A DB9 connector* PC.
= Getting started =