Difference between revisions of "Getting Started with IGEP0022 board"
From IGEP - ISEE Wiki
m |
|||
Line 55: | Line 55: | ||
*J403, Modem Reset | *J403, Modem Reset | ||
− | | [[Image:Jumper1.jpg|302x156px]]<br> | + | | style="text-align: center;" | [[Image:Jumper1.jpg|302x156px]]<br> |
|- | |- | ||
| | | | ||
Line 62: | Line 62: | ||
*J702, CAN reset | *J702, CAN reset | ||
− | | [[Image:Jumper2.jpg|248x232px]]<br> | + | | style="text-align: center;" | [[Image:Jumper2.jpg|248x232px]]<br> |
|} | |} | ||
Revision as of 14:05, 11 July 2011
Contents
Overview
Important - Please read these documents before continuing with this article:
- Official IGEP0022 Hardware Reference Manual from ISEE
- Official IGEP0020 Hardware Reference Manual from ISEE
Mounting IGEP0022
The IGEP0022 expansion board connects to IGEP0020 via 5 connectors of 10, 22, 28 and 30 pins located on both boards. First align the biggest 28 pin-connector gently press it until the other connectors insert into their corresponding connectors from the other board.
Adding peripherals
You can begin to add peripherals like Serial port, VGA monitor, CAN bus, a SIM card reader, TFT and Touchscreen and the S-Video connectors.
Jumpers configuration
Some IGEP0022 boards may include three jumpers that correspond to:
Jumper name |
Position on board |
---|---|
Telit GE865 GSM/GPRS Modem:
|
|
MCP2515 CAN BUS:
|
|
These jumpers are designed for test and lab purposes to force a specific device by hardware.
For a normal use of IGEP0022 THESE JUMPERS SHOULD BE REMOVED from the expansion board.
Serial port
Connect a null modem DB9 male-male serial cable between the board and your host machine, use the serial debug port to communicate with the host machine: Using serial debug port to communicate<span class="editsection" />.
VGA monitor
Connect a VGA monitor to the IGEP0022 VGA connector.
CAN bus
Connect any CAN bus device or network to the CAN bus connector of the IGEP0022.
SIM card reader
A SIM card reader is provided with IGEP0022. You may connect a SIM card to use the GSM/GPRS modem to make phone calls or to send SMS or to write and read data from it, etc.
GSM/GPRS antenna
Connect an external GSM/GPRS antenna to the J404 GSC connector.
TFT and Touchscreen
IGEP0022 integrates a LCD backlight driver (Texas instruments TPS61081) and touch screen controller (Texas instruments TSC2046), 4-wire touch screen controller which supports a low-voltage I/O interface which can be directly connected to a SEIKO 7” LCD or to a POWERTIP 4.3” LCD.
S-Video connectors
There are two S-Video input connectors in the IGEP0020.
How to enable IGEP0020 support
How to enable IGEP0020 support throught igep.ini configuration file
The next step is: What can I do with IGEP0022