Difference between revisions of "Getting Started with IGEP0022 board"
From IGEP - ISEE Wiki
m |
m |
||
Line 3: | Line 3: | ||
Important - Please '''read these documents before continuing''' with this article: | Important - Please '''read these documents before continuing''' with this article: | ||
− | *Official [http://igep.es/index.php?option=com_content&view=article&id=99&Itemid=129&dir=%2Fvar%2Fwww%2Fvhosts%2Figep.es%2Fhttpdocs%2Fdownloads%2F01-ISEE_Products%2FIGEPv2_EXPANSION%2FHW_User_Manuals&download_file=%2Fvar%2Fwww%2Fvhosts%2Figep.es%2Fhttpdocs%2Fdownloads%2F01-ISEE_Products%2FIGEPv2_EXPANSION%2FHW_User_Manuals%2FMAN-PR-IGEP.0022-001.01.HW_USER_MANUAL.pdf IGEP0022 | + | *Official [http://igep.es/index.php?option=com_content&view=article&id=99&Itemid=129&dir=%2Fvar%2Fwww%2Fvhosts%2Figep.es%2Fhttpdocs%2Fdownloads%2F01-ISEE_Products%2FIGEPv2_EXPANSION%2FHW_User_Manuals&download_file=%2Fvar%2Fwww%2Fvhosts%2Figep.es%2Fhttpdocs%2Fdownloads%2F01-ISEE_Products%2FIGEPv2_EXPANSION%2FHW_User_Manuals%2FMAN-PR-IGEP.0022-001.01.HW_USER_MANUAL.pdf IGEP0022 Hardware Reference Manual] from ISEE |
− | *Official [http://igep.es/index.php?option=com_content&view=article&id=99&Itemid=129&dir=%2Fvar%2Fwww%2Fvhosts%2Figep.es%2Fhttpdocs%2Fdownloads%2F01-ISEE_Products%2FIGEPv2%2FHW_User_Manuals&download_file=%2Fvar%2Fwww%2Fvhosts%2Figep.es%2Fhttpdocs%2Fdownloads%2F01-ISEE_Products%2FIGEPv2%2FHW_User_Manuals%2FMAN-PR-IGEP.0020-001.23.HW_RC.pdf IGEP0020 | + | *Official [http://igep.es/index.php?option=com_content&view=article&id=99&Itemid=129&dir=%2Fvar%2Fwww%2Fvhosts%2Figep.es%2Fhttpdocs%2Fdownloads%2F01-ISEE_Products%2FIGEPv2%2FHW_User_Manuals&download_file=%2Fvar%2Fwww%2Fvhosts%2Figep.es%2Fhttpdocs%2Fdownloads%2F01-ISEE_Products%2FIGEPv2%2FHW_User_Manuals%2FMAN-PR-IGEP.0020-001.23.HW_RC.pdf IGEP0020 Hardware Reference Manual] from ISEE |
= <span class="mw-headline">Mounting IGEP0022 </span> = | = <span class="mw-headline">Mounting IGEP0022 </span> = | ||
− | The IGEP0022 expansion board connects to IGEP0020 via 5 connectors of 10, 22, 28 and 30 pins located on both boards. First align the biggest 28 pin-connector gently press it until the other | + | The IGEP0022 expansion board connects to IGEP0020 via 5 connectors of 10, 22, 28 and 30 pins located on both boards. First align the biggest 28 pin-connector gently press it until the other connectors insert into their corresponding connectors from the other board.[[Image:Igep0022_igep0020_combo.jpg|right|404x270px]] |
+ | |||
+ | <br> | ||
+ | |||
+ | <br> | ||
+ | |||
+ | <br> | ||
+ | |||
+ | <br> | ||
+ | |||
+ | <br> | ||
+ | |||
+ | <br> | ||
+ | |||
+ | <br> | ||
+ | |||
+ | <br> | ||
+ | |||
+ | <br> | ||
+ | |||
+ | <br> | ||
+ | |||
+ | |||
= <span class="mw-headline">Adding peripherals </span> = | = <span class="mw-headline">Adding peripherals </span> = | ||
− | You can begin to add peripherals like Serial port, VGA monitor, CAN bus, a SIM card reader, TFT and Touchscreen and the S-Video connectors. | + | You can begin to add peripherals like Serial port, VGA monitor, CAN bus, a SIM card reader, TFT and Touchscreen and the S-Video connectors.<br> |
== Serial port<br> == | == Serial port<br> == | ||
− | Connect a [http://en.wikipedia.org/wiki/Null_modem null modem] DB9 male-male serial cable between the board and your host machine, use the serial debug port to communicate with the host machine: [[ | + | Connect a [http://en.wikipedia.org/wiki/Null_modem null modem] DB9 male-male serial cable between the board and your host machine, use the serial debug port to communicate with the host machine: [[Using serial debug port to communicate|Using serial debug port to communicate]]<span class="editsection" />.<br> |
− | == VGA monitor == | + | == VGA monitor == |
+ | Connect a VGA monitor to the IGEP0022 VGA connector.<br> | ||
+ | == CAN bus == | ||
− | + | Connect any CAN bus device or network to the CAN bus connector of the IGEP0022.<br> | |
− | |||
− | |||
== SIM card reader == | == SIM card reader == | ||
− | A SIM card reader is provided with IGEP0022. You may connect a SIM card to use the GSM/GPRS modem to make phone calls or to send SMS or to write and read data from it, etc. | + | A SIM card reader is provided with IGEP0022. You may connect a SIM card to use the GSM/GPRS modem to make phone calls or to send SMS or to write and read data from it, etc. |
== GSM/GPRS antenna == | == GSM/GPRS antenna == | ||
Line 34: | Line 56: | ||
Connect an external GSM/GPRS antenna to the J404 GSC connector. | Connect an external GSM/GPRS antenna to the J404 GSC connector. | ||
− | [[Image:IGEP0022 Modem with antenna.png|center|497x309px]] | + | [[Image:IGEP0022 Modem with antenna.png|frame|center|497x309px]] |
− | |||
− | |||
+ | == TFT and Touchscreen<br> == | ||
+ | IGEP0022 integrates a LCD backlight driver (Texas instruments TPS61081) and touch screen controller (Texas instruments TSC2046), 4-wire touch screen controller which supports a low-voltage I/O interface which can be directly connected to a SEIKO 7” LCD or to a POWERTIP 4.3” LCD.<br> | ||
− | + | [[Image:IGEP0022_PROTO_RA_DSC_0142.JPG|frame|center|500x363px]]<br> | |
+ | == S-Video connectors == | ||
+ | There are two S-Video input connectors in the IGEP0020.<br> | ||
= How to enable IGEP0020 support = | = How to enable IGEP0020 support = | ||
− | (ipeg.ini) | + | <span style="background-color: rgb(255, 0, 0);">(ipeg.ini) |
+ | </span> | ||
= <span class="mw-headline">The next step is: [[What can I do with IGEP0022|What can I do with IGEP0022]]</span><br> = | = <span class="mw-headline">The next step is: [[What can I do with IGEP0022|What can I do with IGEP0022]]</span><br> = |
Revision as of 12:39, 8 July 2011
Contents
Overview
Important - Please read these documents before continuing with this article:
- Official IGEP0022 Hardware Reference Manual from ISEE
- Official IGEP0020 Hardware Reference Manual from ISEE
Mounting IGEP0022
The IGEP0022 expansion board connects to IGEP0020 via 5 connectors of 10, 22, 28 and 30 pins located on both boards. First align the biggest 28 pin-connector gently press it until the other connectors insert into their corresponding connectors from the other board.
Adding peripherals
You can begin to add peripherals like Serial port, VGA monitor, CAN bus, a SIM card reader, TFT and Touchscreen and the S-Video connectors.
Serial port
Connect a null modem DB9 male-male serial cable between the board and your host machine, use the serial debug port to communicate with the host machine: Using serial debug port to communicate<span class="editsection" />.
VGA monitor
Connect a VGA monitor to the IGEP0022 VGA connector.
CAN bus
Connect any CAN bus device or network to the CAN bus connector of the IGEP0022.
SIM card reader
A SIM card reader is provided with IGEP0022. You may connect a SIM card to use the GSM/GPRS modem to make phone calls or to send SMS or to write and read data from it, etc.
GSM/GPRS antenna
Connect an external GSM/GPRS antenna to the J404 GSC connector.
TFT and Touchscreen
IGEP0022 integrates a LCD backlight driver (Texas instruments TPS61081) and touch screen controller (Texas instruments TSC2046), 4-wire touch screen controller which supports a low-voltage I/O interface which can be directly connected to a SEIKO 7” LCD or to a POWERTIP 4.3” LCD.
S-Video connectors
There are two S-Video input connectors in the IGEP0020.
How to enable IGEP0020 support
(ipeg.ini)