Revision as of 14:00, 7 July 2011

Overview

Important - Please read these documents before continuing with this article:

• Official IGEP0022 Hardware Reference Manual from ISEE
• Official IGEP0020 Hardware Reference Manual from ISEE

Mounting IGEP0022

The IGEP0022 expansion board connects to IGEP0020 via 5 connectors of 10, 22, 28 and 30 pins located on both boards. First align the biggest 28 pin-connector gently press it until the other four connectors insert into their corresponding connectors.

Adding peripherals

You can begin to add peripherals like Serial port, VGA monitor, CAN bus, a SIM card reader, TFT and Touchscreen and the S-Video connectors.

Serial port

Connect a null modem DB9 male-male serial cable between the board and your host machine, use the serial debug port to communicate with the host machine: Using serial debug port to communicate[[../../../../index.php?title=Getting_Started_with_BASE0010_board&action=edit&section=5|it]]] <span class="mw-headline" />

VGA monitor

CAN bus

SIM card reader

A SIM card reader is provided with IGEP0022. You may connect a SIM card to use the GSM/GPRS modem to make phone calls or to send SMS or to write and read data from it, etc.

GSM/GPRS antenna

Connect an external GSM/GPRS antenna to the J404 GSC connector.

TFT and Touchscreen

S-Video connectors

How to enable IGEP0020 support

(ipeg.ini)

The next step is: What can I do with IGEP0022