Difference between revisions of "Getting Started with IGEP0022 board"
From IGEP - ISEE Wiki
m |
m |
||
| Line 26: | Line 26: | ||
| − | == SIM card reader == | + | == SIM card reader == |
| − | |||
| + | A SIM card reader is provided with IGEP0022. You may connect a SIM card to use the GSM/GPRS modem to make phone calls or to send SMS or to write and read data from it, etc. | ||
== GSM/GPRS antenna == | == GSM/GPRS antenna == | ||
Revision as of 13:58, 7 July 2011
Contents
Overview
Important - Please read these documents before continuing with this article:
- Official IGEP0022 Hardware Reference Manual from ISEE
- Official IGEP0020 Hardware Reference Manual from ISEE
Mounting IGEP0022
The IGEP0022 expansion board connects to IGEP0020 via 5 connectors of 10, 22, 28 and 30 pins located on both boards. First align the biggest 28 pin-connector gently press it until the other four connectors insert into their corresponding connectors.
Adding peripherals
You can begin to add peripherals like Serial port, VGA monitor, CAN bus, a SIM card reader, TFT and Touchscreen and the S-Video connectors.
Serial port
VGA monitor
CAN bus
SIM card reader
A SIM card reader is provided with IGEP0022. You may connect a SIM card to use the GSM/GPRS modem to make phone calls or to send SMS or to write and read data from it, etc.
GSM/GPRS antenna
Connect an external GSM/GPRS antenna to the J404 GSC connector.
TFT and Touchscreen
S-Video connectors
How to enable IGEP0020 support
(ipeg.ini)
