Firsts steps with AM335x

Board support package

U-boot

• src: http://git.isee.biz/?p=pub/scm/u-boot-arm.git;a=shortlog;h=refs/heads/master-am33x

Kernel

• src: http://git.isee.biz/?p=pub/scm/linux-omap-2.6.git;a=shortlog;h=refs/heads/linux-3.2.y-am335x

ANNEX

UART recovery boot

1. Make sure the BOOT mode is set to UART. 2. Connect to the debug UART with your computer and launch the serial terminal application

 picocom -b 115200 /dev/ttyUSB0 --send-cmd "sz -vv -X" --receive-cmd  "rz -vv  -X"

3. Start the board. When "CCCC" characters appear on terminal window, do:

 C-a C-s
 *** file: spl/u-boot-spl.bin

4. Exit from picocom using C-a C-q, and relaunch picocom with

 picocom -b 115200 /dev/ttyUSB0 --send-cmd "sz -vv -Y" --receive-cmd  "rz -vv  -Y"

5. When "CCCC" characters appear on terminal window, do:

 C-a C-s
 *** file: u-boot.img

6. Hitting any key to stop automatic boot, should present the U-Boot prompt.

EMIF Timings

• http://processors.wiki.ti.com/index.php/AM335x_DDR_PHY_register_configuration_for_DDR3

K4B2G1646E-BIH9 : EMIF Parameters. Refer the EMIF register documentation and the memory datasheet for details

• For 303 MHz m_clk 3.3ns

 28-25   reg_t_rp      4 - 13.5ns
 24-21   reg_t_rcd     4 - 13.5ns
 20-17   reg_t_wr      4 - 15ns
 16-12   reg_t_ras    10 - 36ns
 11-6    reg_t_rc     15 - 49.5ns
 5-3     reg_t_rrd     4
 2-0     reg_t_wtr     4
 EMIF_TIM1    000 00100 00100 0100 01010 001110 011 011
 EMIF_TIM1    0x0888A39B

 30-28   reg_t_xp     3 - 3nCK
 27-25   reg_t_odt    5 - 6nCK
 24-16   reg_t_xsnr   4 - 5nCK
 15-6    reg_t_xsrd   4 - 5nCK
 5-3     reg_t_rtp    3 - 4nCK
 2-0     reg_t_cke    2 - 3nCK
 EMIF_TIM2    0 010 101 000000100 0000000100 011 010
 EMIF_TIM2    0x2A04011A

 31-28   reg_t_pdll_ul    5
 27-21   reg_t_ckesr      0
 20-15   reg_zq_zqcs      63 - 64nCK
 14-13   reg_t_tdqsckmax  0
 12-4    reg_t_rfc        32 - 107ns
 3-0     reg_t_ras_max    15
 EMIF_TIM3 0101 000000000 111111 00 000100000 1111
 EMIF_TIM3 0x501F820F

 31    reg_initref_dis   0 Initialization
 30    Reserved          0
 29    reg_srt           0 extended temp.
 28    reg_asr           0 manual Self Refresh
 27    Reserved          0
 26-24 reg_pasr          0
 23-16 Reserved          0
 15-0  reg_refresh_rate  3B9
 EMIF_SDREF   0 0 0 0 0 000 00000000 3B9
 EMIF_SDREF   0x000003B9

 31-29 reg_sdram_type      3 - DDR3
 28-27 reg_ibank_pos       0
 26-24 reg_ddr_term        2 - RZQ/2
 23    reg_ddr2_ddqs       1 - differential DQS
 22-21 reg_dyn_odt         1 - Dynamic ODT RZQ/4
 20    reg_ddr_disable_dll 0 - enable DLL
 19-18 reg_sdram_drive     1 - drive strength RZQ/7
 17-16 reg_cwl             2 - CAS write latency 7
 15-14 reg_narrow_mode     1 - 16-bit data bus width
 13-10 reg_cl              10 - CAS latency of 9
 9-7   reg_rowsize         5 - 14 row bits
 6-4   reg_ibank           3 - 8 banks
 3     reg_ebank           0 - 1 chip select
 2-0   reg_pagesize        2 - 10 column bits
 EMIF_SDCFG 0011 00 010 1 01 0 01 10 01 1010 101 011 0 010
 EMIF_SDCFG 0x61C24AB2