=== JC30 connector ===
JC30 is used to connect a camera for capture video or image. Omap have the processing capability to connect RAW image-sensor modules via this connector. But default Default [[Linux Kernel 2.6.35.y|kernel 2.6.35.y]] cam is not enable.<br>
The next table show JC30 connector information<br> {| cellspacing="1" cellpadding="1" border="1" style="width:674px; height: 104px;"|-| Pad | Connect to | Main peripheral | Main utility | Other available peripherals | Share with |-| 1 | JTAG_TMS | JTAG_TMS<br> | <br> | - | -|-| 2 | JTAG_NTRST | JTAG_NTRST<br> | <br> | - | -|-| 3 | JTAG_TDI | JTAG_TDI<br> | <br> | - | -|-| 4 | GND | - | GND | - | -<br>|-| 5 | 1V8 | Power 1V8<br> | <br> | - | -<br>|-| 6 | - | - | <br> | - | -|-| 7 | JTAG_TD0 | JTAG_TD0<br> | <br> | - | -|-| 8 | GND | - | GND | - | -|-| 9 | JTAG_RTCK | JTAG_RTCK<br> | <br> | - | -|-| 10 | GND | - | GND | - | -|-| 11 | JTAG_TCK | JTAG_TCK<br> | <br> | - | -|-| 12 | GND | - | GND | - | -|-| 13 | JTAG_EMU0 | JTAG_EMU0(mode=0)<br> | <br> | GPIO_11(mode=4) | -|-| 14 | JTAG_EMU1 | JTAG_EMU1(mode=0)<br> | <br> | GPIO_31(mode=4) | -|}<br>
{| cellspacing="1" cellpadding="1" border="1" width="200"
|}
<br>
=== JA42 connector ===