Changes

Connectors Summary

5 bytes removed, 19:39, 12 February 2012
no edit summary
=== J990 connector ===
Using this expansion connector you have access to McBSP1, McBSP3, I2C2, MMC2(8 bits), nReset and REGEN signals from OMAP Processor. The interface is at 1.8V on all signals. Only 1.8V CMOS levels are supported. DO NOT Do not expose the header to 3.3V.  J990 connector is [http://beagleboard.org/ BeagleBoard] compatible expansion connector. IGEPv2-NOWIFI board is fully compatible. Other IGEPv2 board versions need software configuration to disable wifi interface and others because of shared hardware lines. MMC2 interface is used by wifi module. McBSP3 interface is used by PCM TPS65950 interface.
See which versions have WIFI/BT combo [[Frequently Asked Questions and Their Answers#Which_revision_is_my_IGEPv2_board.3F|available]].
| -
|}
 
=== J960 connector ===
4,199
edits