What can I do with IGEP COM PROTON
From IGEP - ISEE Wiki
| |
| |||||||||
Overview
This is the 2/3 chapter of IGEP COM PROTON Tutorial Guide.
We will learn some basic tasks.
What can I do
You must logged in the board.
Handle the gpio-LED's
The board has three leds available that can be controlled. In its simplest form, you can control of LEDs from userspace. LEDs appear in /sys/class/leds/ and you can turn on and off with following commands:
echo 1 > /sys/devices/platform/leds-gpio/leds/d242\:green/brightness echo 1 > /sys/devices/platform/leds-gpio/leds/d441\:green/brightness echo 1 > /sys/devices/platform/leds-gpio/leds/d442\:green/brightness
A detailed guide on how use GPIO-LEDS can be found by following this link: How to handle the gpio-LED
How to use the SD card
You can connect a micro SD card for storage. After plugin the SD card the kernel should detect the card and automount in /media directory.
You have successfully completed this chapter of the guide.
| |
![]() |
If you have any question, don't ask to ask at the IGEP Community Forum or the IGEP Community Chat | ![]() |