IGEP SMARC iMX6
From IGEP - ISEE Wiki
Contents
SMARC module SINGLE/DUAL/QUAD core ARM Cortex-A9 up to 1200 MHz
IGEP SMARC iMX6 |
---|
Highlight | Possible Applications |
---|---|
|
|
Technical information | |
---|---|
Processor |
iMX6 Solo/DualLite/Dual/Quad, by NXP Semiconductors |
3D/2D Accelerator | Vivante GC2000 or GC880 (depending on model), GC355 and GC320,
providing 2D/3D acceleration with OpenGL-ES2.0 and OpenVG 1.1 support. |
Video |
Video acceleration: H.264, H.263, MPEG-2 and MPEG-4 |
Memory |
RAM: 512 MB, 1 GB or 2 GB DDR3 |
Ethernet |
10/100/1000 Mbps Ethernet PHY Interface |
USB |
1 x USB 2.0 Host |
Display |
1 x LVDS (4 lanes) |
Image Capture Interface | 1 x MIPI CSI2 interfaces (4 lanes Dual/Quad version, 2 lanes Solo/DualLite version) |
Wireless |
WiFi IEEE 802.11 b/g/n (Access Point: Yes) |
Antenna |
1 x Internal WiFi/Bluetooth antenna |
Additional Interfaces |
3 x UART (4 x No WiFi version) |
SW Support | Linux |
Power Supply | Power from expansion connectors: From 4,7 V to 5,25 V Digital I/O voltage: 1,8 V |
Power Consumption | Typical 1,8 W (depending on software) (Quad version) Maximum 6 W (depending on software) (Quad version) |
Thermal | Commercial temperature: 0 ºC to +60 ºC Industrial temperature: -40 ºC to +85 ºC |
Form Factor | 82,00 mm x 50 mm by SMARC Specifications |
Humidity | 93% relative Humidity at 40 ºC, non-condensing (according to IEC 60068-2-78) |
MTBF | > 100000 hours |
Evaluation Baseboard (IGEP SMARC EXPANSION) | |
---|---|
Peripherals | 1 x Button LED 3 x Boot jumpers 1 x SPI 1 x I2C 1 x MMC 1 x CAN transceiver 1 x RS485 2 x RS232 1 x Audio codec |
Connectors | 1 x SMARC connector 5 V Power Supply 1 x 10/100/1000 Mbps Ethernet PHY Interface 1 x HDMI 1.4a output type A receptacle 3 x USB 2.0 type A receptacle 1 x USB 3.0 type micro AB receptacle 1 x Serial RS232 3V3 expansion header 1 x Serial TTL 3V3 debug header 1 x Stereo Line Audio mic In mini jack 1 x Stereo Line Audio Out mini jack 1 x LVDS connector (with power supply, touch interface and EDID information) 1 x CSI connector (Raspberry Pi camera compatible) 1 x Terminal 5 pins plug 1 x I/O Expansion 28 pins header 1 x Modem USB interface 1 x mSATA interface 1 x Micro SD connector Form factor: 170mm (L) x 170mm (W) (mini-ITX form factor) |
Power | Power from expansion connectors: 5V Power from jack power: 5V |
SW Support |
Linux |
Thermal | Commercial temperature: 0 ºC to +60 ºC Industrial temperature: -40 ºC to +85 ºC |
Form Factor | 142 mm x 90 mm |
Revisions
Model | Description |
---|---|
IGEP0046 - RA99 | (2015) |
IGEP0046 - RA | (2015) |
IGEP0046 - RB | (2016) |
IGEP0046 - RC | (2016) |
IGEP0046 - RD | (2018) |
Variants
Model | Variants | ||
---|---|---|---|
IGEP0046-RD01 | IGEP0046-DWU1-4XXX ==> WIFI | DUAL-LITE DDR 1GB | -FLASH 4GB SENSE NOR SPI |
IGEP0046-RD02 |
IGEP0046-DWQ2-8SXX ==> WIFI | QUAD DDR 2GB | -FLASH 8GB SPI NOR |
IGEP0046-RD03 | IGEP0046-DWU2-4XXX ==> WIFI | DUAL-LITE DDR 2GB | -FLASH 4GB SENSE NOR SPI |
IGEP0046-RD04 | IGEP0046-DWQ1-8SXX ==> WIFI | QUAD DDR 1GB | -FLASH 8GB SPI NOR |
IGEP0046-RD05 | IGEP0046-DWE2-8SXX ==> WIFI | DUAL-PLUS DDR 2GB | -FLASH 8GB SPI NOR |
IGEP0046-RD06 |
IGEP0046-DWR2-8SXX ==> WIFI | QUAD-PLUS DDR 2GB | -FLASH 8GB SPI NOR |
IGEP0046-RD07 | IGEP0046-DWSH-4XXX ==> WIFI | SOLO DDR 512MB | -FLASH 4GB SENSOR NOR SPI |
IGEP0046-RD08 | IGEP0046-DWD2-8SXX ==> WIFI | DUAL DDR2GB | -FLASH 8GB SPI NOR |
IGEP0046-RD10 | IGEP0046-DWU2-4XXX ==> WIFI | DUAL-LITE DDR 2GB | -FLASH 4GB SENSOR NOR SPI |
Firmware
Documentation
- i.MX 6 Solo
- i.MX 6 Dual Lite
- i.MX 6 Dual
- i.MX 6 Quad
- IGEP SMARC iMX6 Datasheet
- IGEP SMARC iMX6 Hardware Reference Manual
- SMARC Design Guide
- SMARC Hardware Specification
- Pre-installed_software_on_IGEP_Processor_Boards
- Update_the_PRE-INSTALLED_software_image_to_a_current_release
- How to boot from MicroSD Card
- IGEP Firmware Yocto
- IGEP Firmware Ubuntu
- IGEP Firmware Debian
- U-boot Bootloader
- Linux Kernel
- IGEPv2 Boot Process