IGEP SMARC iMX6

SMARC module SINGLE/DUAL/QUAD core ARM Cortex-A9 up to 1200 MHz

IGEP SMARC iMX6

Highlight	Possible Applications
Freescale i.MX6 Cortex-A9 Solo, Dual-Lite, Dual and Quad up to 1.2GHz 1GB DDR3L (2GB Option, Solo=512MB), 4GB eMMC Flash, 1x SD/MMC, 1x SATA (D/Q) Parallel 18/24-bit RGB, 24-bit dual-chann. LVDS, HDMI 1 x 10/100/1000Mbps LAN 2 x CAN, 4 x UART, 5 x I2C, 2 x I2S, 1 x PCIe, 12 x GPIOs, 2 x SPI, 4-LANE Serial Camera Interface	Human Machine Interface (HMI) Rear Seat Entertainment Systems In-Freight Entertainment The Internet of Things (IOT) Medical-CT Scanner Digital Signage Point of Sales Display Units General Control Systems Smart Grid HVAC Control System

Technical information
Processor	iMX6 Solo/DualLite/Dual/Quad, by NXP Semiconductors Up to 4 x ARM Cortex-A9 MPCore NEON SIMD Coprocessor Frequency speed up to 1200 MHz (depending on model)
3D/2D Accelerator	Vivante GC2000 or GC880 (depending on model), GC355 and GC320, providing 2D/3D acceleration with OpenGL-ES2.0 and OpenVG 1.1 support.
Video	Video acceleration: H.264, H.263, MPEG-2 and MPEG-4
Memory	RAM: 512 MB, 1 GB or 2 GB DDR3 eMMC Flash: 4 GB or 8 GB eMMC SPI Flash (optional) EEPROM
Ethernet	10/100/1000 Mbps Ethernet PHY Interface
USB	1 x USB 2.0 Host 1 x USB 2.0 OTG
Display	1 x LVDS (4 lanes) 1 x HDMI 1.4a (with audio) 1 x MIPI DSI (2 lanes)
Image Capture Interface	1 x MIPI CSI2 interfaces (4 lanes Dual/Quad version, 2 lanes Solo/DualLite version)
Wireless	WiFi IEEE 802.11 b/g/n (Access Point: Yes) Bluetooth v4.0 (BLE)
Antenna	1 x Internal WiFi/Bluetooth antenna 1 x U.FL connector for external antenna
Additional Interfaces	3 x UART (4 x No WiFi version) 4 x I2C (3 x Dual/Quad version) 1 x MMC 1 x I2S (2 x No WiFi version) 2 x SPI 2 x PWM 2 x CAN 1 x SDIO 12 x GPIO 1 x JTAG Interface 1 x SATA II (Dual/Quad version) 1 x PCIe v2.0 (1 lane) (Dual/Quad version)
SW Support	Linux
Power Supply	Power from expansion connectors: From 4,7 V to 5,25 V Digital I/O voltage: 1,8 V
Power Consumption	Typical 1,8 W (depending on software) (Quad version) Maximum 6 W (depending on software) (Quad version)
Thermal	Commercial temperature: 0 ºC to +60 ºC Industrial temperature: -40 ºC to +85 ºC
Form Factor	82,00 mm x 50 mm by SMARC Specifications
Humidity	93% relative Humidity at 40 ºC, non-condensing (according to IEC 60068-2-78)
MTBF	> 100000 hours

	Evaluation Baseboard
Peripherals	1 x Button LED
	3 x Boot jumpers
	1 x SPI
	1 x I2C
	1 x MMC
	1 x CAN transceiver
	1 x RS485
	2 x RS232
	1 x Audio codec
Connectors	1 x SMARC connector 5 V Power Supply 1 x 10/100/1000 Mbps Ethernet PHY Interface
	1 x HDMI 1.4a output type A receptacle 3 x USB 2.0 type A receptacle 1 x USB 3.0 type micro AB receptacle
	1 x Serial RS232 3V3 expansion header 1 x Serial TTL 3V3 debug header 1 x Stereo Line Audio mic In mini jack
	1 x Stereo Line Audio Out mini jack 1 x LVDS connector (with power supply, touch interface and EDID information) 1 x CSI connector (Raspberry Pi camera compatible)
	1 x Terminal 5 pins plug 1 x I/O Expansion 28 pins header 1 x Modem USB interface
	1 x mSATA interface 1 x Micro SD connector
	Form factor: 170mm (L) x 170mm (W) (mini-ITX form factor)
Power	Power from expansion connectors: 5V Power from jack power: 5V
SW Support	Linux
Thermal	Commercial temperature: 0 ºC to +60 ºC Industrial temperature: -40 ºC to +85 ºC
Form Factor	142 mm x 90 mm

Versions

Model	Description
IGEP0046 - RA
IGEP0046 - RB
IGEP0046 - RC
IGEP0046 - RD

Firmware

Documentation

• i.MX 6 Solo
• i.MX 6 Dual Lite
• i.MX 6 Dual
• i.MX 6 Quad
• IGEP SMARC iMX6 Datasheet
• IGEP SMARC iMX6 Hardware Reference Manual
• SMARC Design Guide
• SMARC Hardware Specification

Software

• [1]

Getting started with IGEP SMARC iMX6

• Getting Started with IGEP SMARC iMX6